User manual SEGA NASCAR DX U.S

[. . . ] 01 Deluxe Version Owner's Manual SEGA ENTERPRISES, INC. 4201-6588-01 Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. [. . . ] · After testing, press the test button and the service button simultaneously. The GAME TEST MENU screen reappears. VIEW CHANGE BUTTON STEERING WHEEL START BUTTON GEAR POSITION BRAKE PEDAL GAS PEDAL FIG. OUTPUT TEST Press the service button to select the OUTPUT TEST item in the GAME TEST MENU screen, and press the test button. The following OUTPUT TEST screen appears to test the output devices. Periodically test the output devices (the lights integrated with the START and VIEW CHANGE buttons and base shaker) by using the screen. OUTPUT TEST > START BUTTON VIEW CHANGE BUTTON BASS SHAKER(FRONT) BASS SHAKER(FRONT+REAR) PRESS TEST BUTTON TO EXIT Item is automatically changed or selected in turn. Make sure that the corresponding output device can normally operate (that is, the light comes on or the base shaker vibrates). The GAME TEST MENU screen reappears. 52 D. FORCE FEEDBACK Press the service button to select the FORCE FEEDBACK item in the GAME TEST MENU screen, and press the test button. The following FORCE FEEDBACK screen appears to set the intensity of the force feedback against the steering wheel (handle) during playing. FORCE FEEDBACK (MIN 0 : MAX 10 : DEFAULT 9) FORCE = UP DOWN FORCE TEST (FORCE = 4) CENTER OFF RIGHT OFF LEFT OFF > EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON 9 FORCE : Indicates the intensity of the force feedback. The larger number the more intense force feedback. : Tests the performance of the motor of the steering motor unit. Press the service button to select the CENTER, RIGHT, and LEFT items in turn, and press the test button. Make sure that each item can change its indication from OFF to ON as you press the test button; and eventually the motor can operate to make the handle turn to right or left or fixed at a center position (for a straight-ahead direction) as selected by you. : Returns to the GAME TEST MENU screen. FORCE TEST EXIT 53 E. INPUT ASSIGNMENTS Press the service button to select the INPUT ASSIGNMENTS item in the GAME TEST MENU screen, and press the test button. The following INPUT ASSIGNMENTS screen appears to select the input device. INPUT ASSIGNMENTS STEERING (DEFAULT = 0) GAS PEDAL (DEFAULT = 0) BRAKE PEDAL (DEFAULT = 0) 0 0 0 DEFAULT SETTING > EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Press the service button to move the > mark to a targeted input device to select, and press the test button. Then the assignments screen of the selected input device appears. Selecting the DEFAULT SETTING recovers to the standard factory settings. After testing, select the EXIT and press the test button. STEER ASSIGNMENTS This screen enables to set the volume value of the steering wheel (handle). In other words, this screen sets the volume value of the steering wheel's center position (for a straight-ahead direction). Reset the volume value on this screen when the operability of the steering wheel is undesirable. [. . . ] SPG-2201 SPG-2202 SPG-2203 SPG-2204 SPG-2205 SPG-2206 SPG-2207 SPG-2208 SPG-2209 SPG-2210 SPG-2211 SPG-2212 SPG-2213 SPG-2214 SPG-2215 SPG-2216 SPG-2217 SPG-2219 SPG-2220 SPG-2221 100-5263 220-5484 220-5373 601-7944 310-5029-F15 280-0419 028-A00304-P 020-000520-0Z 000-P00420 000-P00508-W 000-T00408-0C FAS-450005 000-P00405 FAS-000001 050-H00500 060-F00400 600-6840 DESCRIPTION BASE ACCEL PEDAL BRAKE PEDAL ACCEL SPRING BRAKE SPRING SHAFT ACCEL GEAR BRAKE GEAR NEUTRAL STOPPER VR PLATE ACCEL VR PLATE BRAKE AMPL GEAR GEAR SHAFT STOPPER RUBBER CUSHION COVER VR COVER GEAR STAY WSHR NEUTRAL STOPPER D BEARING 12 VOL CONT B-5K OHM VOL CONT B-5K GEAR 15 SUMITUBE F F 15MM HARNESS LUG SET SCR HEX SKT CUP P M3 X 4 HEX SKT H CAP SCR BLK M5 X 20 M SCR PH M4 X 2 M SCR PH W/FS M5 X 8 M SCR TH CRM M4 X 8 SPR PIN BLK OZ 6 X 10 M SCR PH M4 X 5 M SCR TH CRM M3 X 6 HEX NUT M5 FLT WSHR M4 WIRE HARN ACCEL&BRAKE (D-2/2) 139 21 ASSY ROLL BAR SIDE (NCR-2300) ITEM NO. 1 2 3 4 NOT SHOWN 101 201 202 203 PART NO. NCR-2150 NCR-2301 NCR-2302 NCR-2303 999-1047 280-5009-01 030-000820-S 060-F00800 000-T00412-0B DESCRIPTION ASSY 4SPEED SHIFTER ROLL BAR SIDE SHIFT COVER SHIFT BOX SHIFT BOX SUPPORT CORD CLAMP 21 HEX BLT W/S M8 X 20 FLT WSHR M8 M SCR TH BLK M4 X 12 140 22 ASSY 4SPEED SHIFTER (NCR-2150) (D-1/2) 141 22 ASSY 4SPEED SHIFTER (NCR-2150) ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 101 102 103 104 105 106 107 201 202 203 204 205 206 207 208 209 210 301 302 PART NO. [. . . ]