User manual SEGA SOUL SURFER

[. . . ] www. seuservice. com 1ST PRINTING JULY `02 Owner's Manual SEGA ENTERPRISES, INC. 999-1479 VISIT OUR WEBSITE! BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] SEQUENCE 3 ~ 8: NOT USED 57 www. seuservice. com 9 - 3 GAME TEST MODE STOP IMPORTANT! When changing the game configuration, changes will not be enabled until the Game Test Mode has been completed. Be sure to exit the Game Test Mode properly after configuration changes. Do not configure the game in ways not described in this text, as this may lead to game malfunctions. A. MENU MODE Select GAME TEST MODE from the System Menu screen to display the Game Test Menu screen. Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to enter the selected item. SYSTEM MENU RAM TEST JVS TEST SOUND TEST C. R. T. TEST SYSTEM ASSIGNMENTS COIN ASSIGNMENTS BOOKKEEPING BACKUP DATA CLEAR CLOCK SETTING ROM BOARD TEST GAME TEST MODE [*****************] -> EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON GAME TEST MODE INPUT TEST OUTPUT TEST GAME ASSIGNMENTS CALIBRATION BOOKKEEPING BACKUP DATA CLEAR > EXIT FIG. 3ab GAME TEST MENU Screen After making changes, be sure to select EXIT and press the TEST Button in order to enable the new settings. Move the cursor to EXIT and press the TEST Button to return to the System Menu screen. www. seuservice. com 58 B. INPUT TEST CAUTION! Entering this mode unlocks the surfboard. It will automatically return to center and move in the direction of the load. Be careful so as to avoid accidents such as falling from the surfboard or allowing it to hit your legs. Take particular care to conduct the Sensor Mat input test. Failing to conduct the test or operating the machine when the Sensor Mat is not in optimum condition may cause accidents. Select INPUT TEST to display the following screen and check the status of input devices. This test should be used periodically to check that each input device is functioning correctly. Make sure that the indicator for each of the input devices can be changed from OFF to ON as you operate the corresponding device. INPUT TEST START LEFT BUTTON RIGHT BUTTON BOARD SWING BOARD ROLL BOARD PITCH SENSOR MAT SERVICE TEST OFF OFF OFF 82H 83H 9AH OFF OFF OFF PRESS TEST AND SERVICE BUTTON TO EXIT FIG. 3 b a INPUT TEST Screen LEFT BUTTON START RIGHT BUTTON FIG. 3 b b SENSOR MAT 59 www. seuservice. com Input values related to the surfboard will change in real time. Confirm that the values change smoothly in response to motion of the board. Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu screen. Recommended Display Values BOARD SWING 7 0 H ~ 9 0 H BOARD ROLL 70H~90H BOARD PITCH 70H~B0H If the surfboard value is set within the above range when it is in the neutral position (it remains still when free), its design will not allow volume damage. If values outside the range of the display value appear or values do not change smoothly in response to the motion of the board, malfunctions or volume damage may result. Refer to Section 10 and make adjustments to the volume gear engagement, etc. BOARD SWING BOARD ROLL BOARD PITCH FIG. [. . . ] SSF-3601 SSF-3602 280-0419 FAS-290032 060-S00800-0B 068-852216-0B 011-T03512 000-T00408 000-P00408 060-S00400 060-F00400 SSF-60038 DESCRIPTION SIDE PANEL L SIDE FRAME L HARNESS LUG HEX SKT SCR BH BLK M8×80 SPR WSHR BLK M8 FLT WSHR BLK 8. 5-22×1. 6 TAP SCR TH 3. 5×12 M SCR TH M4×8 M SCR PH M4×8 SPR WSHR M4 FLT WSHR M4 WH EXT LAMP L B NOTE www. seuservice. com 178 41 ASSY SIDE WALL R (SSF-3650) ITEM NO. 1 2 101 201 202 203 204 205 206 207 208 301 PART NO. SSF-3651 SSF-3652 280-0419 FAS-290032 060-S00800-0B 068-852216-0B 011-T03512 000-T00408 000-P00408 060-S00400 060-F00400 SSF-60039 DESCRIPTION SIDE PANEL R SIDE FRAME R HARNESS LUG HEX SKT SCR BH BLK M8×80 SPR WSHR BLK M8 FLT WSHR BLK 8. 5-22×1. 6 TAP SCR TH 3. 5×12 M SCR TH M4×8 M SCR PH M4×8 SPR WSHR M4 FLT WSHR M4 WH EXT LAMP R NOTE 179 www. seuservice. com 42 LAMP UNIT (SSF-3630) * (D-1/2) Note: Attach 105 using the nuts and the spring washers included. * Drawing differs from actual part www. seuservice. com 180 42 LAMP UNIT (SSF-3630) ITEM NO. 1 2 3 4 5 6 7 101 102 103 104 105 106 107 201 202 203 204 205 301 PART NO. [. . . ]