User manual SEGA WING SHOOTING

[. . . ] (GREAT PLAINS QUAIL, RING-NECKED PHEASANT, CANADA GOOSE, AMERICAN BLACK DUCK, MALLARD DUCK and EASTERN BOB WHITE QUAIL) 12 areas with one bonus stage for each bird. The Bonus stage is CLAY SHOOTING. Perfect round in bonus stage advances to a SPECIAL STAGE! 2 3. HANDLING AND INSTALLATION PLEASE TAKE A MOMENT TO READ THE FOLLOWING BEFORE YOU TURN ON YOUR NEW GAME. The Wing Shooting Championship video game is an indoor game machine. Avoid installing the game in the following locations: Locations subject to rain or water damage Locations in direct sunlight Locations subject to extreme heat Locations near hazardous or flammable liquids or chemicals You will need the following minimum dimensions for egress into your location: 80 inches in height 30 inches in width INSTALLATION Unpack your game carefully. [. . . ] Press START button to go back to Main menu. X PRESS START BUTTON TO EXIT 2. COLOR TEST Use this screen to check the color of monitor. The color blocks in the center should be four bands (Red, Green, Blue and White from top to bottom), each with a color scale from dark to bright, left to right. If the screen does not match this description, adjust the Monitor as described in the Monitor's manual. * Press the START button to exit and go back to the TEST MENU screen. COLOR TEST RED GREEN BLUE WHITE PRESS START BUTTON TO EXIT 7 3. CROSS HATCH Use this screen to check the size of picture. The CROSS HATCH test pattern has a White grid on a Black background. Check following: - The grid line should be straight, and the lines should not have excessive pincushion or barrel distortion. - "Out"line of grid line is the same size as "Out"line of game screen. So, "Out" line should be able to be seen with no overflow of grid lines on screen. If these are not as above, adjust the Monitor as described in the Monitor's manual. * You can exit and go back to the TEST MENU screen by press START button. CROSS HATCH PRESS START BUTTON TO EXIT 4. I/O TEST Use this screen to check the switches in this game. To check the functioning of each switch, activate it and watch the corresponding OFF letters change to ON. If the ON and OFF letters do not appear correctly, check the Harness connections and Switches. * Press START button and Gun trigger simultaneously to exit. I/O TEST COIN A COIN B SERVICE TEST 1P GUN START PUMP TRIGGER : OFF : OFF : OFF : OFF 2P GUN START PUMP TRIGGER : OFF : OFF : OFF : OFF : OFF : OFF PRESS START & GUN TRIGGER TO EXIT 5. SOUND TEST Use this screen to check all game sounds. (Hunter 1 = forward, Hunter 2 = Back) Then pull the TRIGGER. * Press START button and Gun trigger simultaneously to exit. SOUND TEST SOUND CODE 000 BLAK_SHOT PRESS START BUTTON TO CHOOSE PRESS GUN TRIGGER TO PLAY PRESS START & GUN TRIGGER TO EXIT 6. MEMORY TEST Use this screen to check RAM and ROM on the Main P. C. B. will automatically check them when you enter this screen. If there are no problems, the word OK will appear on screen. [. . . ] REBOOT Returning to GAME MODE You can return to normal game mode by doing one or the other of the following: Turn OFF "DIP SWITCH 1, #8" and re-power on the game. (But you will have to make sure to turn OFF "DIP SWITCH 1, #8". ) 9 8. TROUBLE WITH GUN SHOOTING If you have trouble because you can't shoot to the corner of the screen, you may have to adjust the monitor brightness. Turn up the monitor brightness until you can shoot the corner of screen. [. . . ]