User manual SEIKO KINETIC

[. . . ] Weight : Alternating current magnetic field transmission (approximately 1 kHz) : 135 x 125 x 32 mm : 190 g 4. Operational temperature range : 0 °C - 40 °C (for storage -5 °C - +50 °C) 5. [. . . ] · To turn off the charger manually, pull the AC plug out of the receptacle. Case number PRECAUTIONS WARNING 1. Use only SEIKO AC Adaptor Model 7530029. Use of other AC adaptors may result in overheating or fire. It may cause malfunctions or electric shocks. CAUTION 1. Do not use SEIKO YT02A for any other purposes than charging SEIKO KINETIC watches. Follow the directions for use written in this instruction manual. Use the unit and the SEIKO AC Adaptor indoors only. Disconnect the AC plug from the AC receptacle after each use. In case any failures or malfunctions are observed, immediately discontinue using the charger and pull out the AC plug. 5M 43-0A00 Crown Crown position 1M 9T 7L 5M 3M START Button DC jack (for connecting the AC adaptor plug) Timer Setting Switch ON 1M 9T 1M 9T 1M 9T 30min. TIMER 5M 3M 5J 4M 5M 43-0A 00 3 1 2 hrs. 4M 1M 9T 7L 5M 3M 7D 5J 4M Not set in the center The crown is not correctly set NOTICE ON CHARGING Watch Settting Position · The charger may make a subtle noise while charging. · The main body may heat up while charging, however, it does not affect the functions of the watch. [. . . ] 20 min. 30 min. 3. 5 hrs. AC Adaptor 15 min. 3 hrs. AC cord AC plug * The approximate charging time required for a watch which has already run down to resume its normal operational movement in one-second intervals. (The state that the watch can be worn under normal condition. ) ** The approximate charging time required for a watch which has already run down to be fully charged. 5M43- 0A 0 0 5M 43-0A 00 5M 43-0A 00 BUTTONS & OPERATIONS 7D 5J 4M 5M 3M 5J 5J 5M 3M 4M [. . . ]