User manual SEIKO S23 M796

[. . . ] Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Digital Cal. Para obter os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o seu Relógio SEIKO Quartz Digital. Queira conservar este manual para referências futuras. ENGLISH English CONTENTS Page MODE CHANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TIME/CALENDAR MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 7 9 10 12 14 15 17 19 23 3 English CAL. S23 M796 TIME/CALENDAR STOPWATCH q The stopwatch measures up to 10 hours in 1/100 second increments. q Memory recall function: Up to 8 lap times can be stored in memory. STROKE FUNCTION q The number of strokes per minute is automatically calculated by measuring the time required to make three strokes. TIMER q Preset timer function: 9 different lengths of time have been preset. q Adjustable timer function: Can be set for up to 9 hours and 59 minutes in one-minute increments. DAILY ALARM ILLUMINATING LIGHT (ELECTROLUMINESCENT PANEL) 4 MODE CHANGE English B Mode mark (No mode mark in TIME/ CALENDAR mode) C CHRO A D E A With each press, the mode changes in the following order: TIME/ CALENDAR mode STOPWATCH mode STROKE mode TIMER mode ALARM mode 5 English TIME/CALENDAR MODE TIME/CALENDAR SETTING A w Press to show TIME/CALENDAR mode. Press for 2 to 3 seconds. B B C w w C Select the digits to be adjusted. Seconds Minutes Hour Date 12-/24-hour indication Year Month A D w D w Set the flashing digits. Return to TIME/CALENDAR mode. B 6 STOPWATCH MODE q The stopwatch measures up to 10 hours in 1/100 second increments. q The first 8 lap times are automatically stored in memory. English A Press to show STOPWATCH mode. C Current time Time measured CHRO A STOPWATCH OPERATION Standard measurement D C START C STOP D RESET 7 w w English Accumulated elapsed time measurement C START C STOP C C STOP D RESET w w w RESTART * Restart and stop of the stopwatch can be repeated by pressing button C. Lap time measurement C START D LAP 1 D LAP 2 C STOP w D RESET w w w * Measurement of lap time can be repeated by pressing button D. q MEMORY RECALL FUNCTION The stored data can be recalled either during or after the measurement. B Recall mark RCL B w Press to activate the memory recall function. With each press, the stored data are recalled from the oldest to the newest. Return to STOPWATCH mode. D CHRO w D 8 B w STROKE MODE English q The number of strokes per minute is automatically calculated by measuring the time required to make three strokes. A Press to show STROKE mode. C C PACE Press to start measurement. Press to stop measurement when the third stroke is made. * The number of strokes per minute will be displayed. w C A 9 TIMER MODE English q Two types of timers are available: preset timer and adjustable timer. A Press to show TIMER mode. B Current time Set time TMR C Number of times the countdown is repeated A D PRESET TIMER SETTING D Select the preset time. 3 minutes 5 minutes 45 minutes 10 minutes 40 minutes 15 minutes 35 minutes 20 minutes 30 minutes 10 ADJUSTABLE TIMER SETTING English B w Press for 2 to 3 seconds. Return to TIMER mode. Minutes C w w Hour D w B TIMER OPERATION C START C STOP C C STOP D RESET w w w RESTART * When the set time is up, a warning sound beeps for 5 seconds. If the illuminating light remains dim after the battery is replaced, have the electroluminescent panel replaced with a new one by the retailer from whom the watch was purchased, or an AUTHORIZED SEIKO DEALER. q While the illuminating light is used, the watch gives out a slight noise. However, this is not a malfunction. English BATTERY CHANGE 2 Years The miniature battery which powers your watch should last approximately 2 years. However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an AUTHORIZED SEIKO DEALER and request SEIKO CR2025 battery. * The battery life may be less than 2 years if the alarm is used for more than 20 seconds a day and/or the illuminating light more than 3 times a day. q Battery life indicator When all the digits start flashing, have the battery replaced with a new one as soon as possible. 17 English q Necessary procedure after battery change After the battery is replaced with a new one, or if an abnormal display (broken digits, etc. ) appears, follow the procedure below to reset the IC. Press and hold buttons A, B, C and D at the same time for 2 to 3 seconds. The display shown at right appears. * Before using the watch, set the time/calendar and alarm. WARNING q Do not remove the battery from the watch. q If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. CAUTION q Never short-circuit, heat or otherwise tamper with the battery, and never expose it to fire. [. . . ] This condition, however, will be corrected when the watch returns to normal temperature. * Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. ** We recommend that you wear a SEIKO Diver's Watch for scuba diving. English s TEMPERATURES Your watch works with stable accuracy within a temperature range of 5°C and 35°C (41°F -10°C and 95°F). Temperatures over 50°C (122°F) or below ­10°C (+14°F) may cause a slight time loss or gain or battery leakage or shorten the battery life. [. . . ]