User manual SEIKO SAT100

[. . . ] String name indication AUTO mode: The tuner automatically identifies and indicates the string name of the note given by the instrument. MANUAL and SOUND modes: The string name you have set is indicated. Flat/sharp tuning indication The current setting for flat/sharp tuning is shown. GUITAR/BASS indication The type of instrument to tune is shown. Tuning guide As a guide in tuning, it visually shows the difference in pitch between the string name indicated on the display and the note given by the instrument by means of the LED lights. [. . . ] : Select from LowB (LB), 4E, 3A, 2D, 1G and HighC (HC). * In SOUND mode, the note that the tuner produces is an octave higher in the guitar tuning and two octaves higher in the bass tuning than the corresponding string note. / setting + Flat tuning up to 5 semitones and sharp tuning up to 7 semitones are possible. * The sharp tuning function is convenient when you tune the instrument using capotasto. When the capatasto is put on the first fret, set " " on the tuner, and set " " when it is put on the second fret. HOW TO TUNE THE INSTRUMENT AUTO/MANUAL mode Tune the instrument according to the indication of the tuning meter on the liquid crystal display. To tune an electric guitar/bass, connect the output cord of the instrument to the input jack Press the power button to turn on the tuner. Press the selector button to select "G/BASS". Press UP or DOWN button to select the type of instrument from "GUITAR" and "BASS". Press UP or DOWN Select the tuning mode. Press the selector button button to set the tuning mode to "AUTO" or "MANUAL". If you have selected "MANUAL" mode, select the name of the string you wish to tune. Press the selector button to select "NOTE". Press UP or DOWN button to set the desired string name. To change the reference pitch, press the selector button to select "PITCH". Press UP or DOWN button to set the desired frequency. Press UP or DOWN For flat/sharp tuning, press the selector button button to set the flat/sharp tuning as desired. When tuning an acoustic instrument, bring it as close as possible to the built-in microphone . Tune the instrument until the LED at the center of the tuning guide lights up in green and the pointer of the tuning meter stays in the center ("0" position). To tune the instrument more accurately, tune it further until the cent indication 6. 9. [Flat] SOUND mode [In tune] [Sharp] The tuner gives out the note of the string you wish to tune. Press the power button to turn on the tuner. Press the selector button to select "G/BASS". Press UP or DOWN button to select the type of instrument from "GUITAR" and "BASS". Press UP or DOWN Select the tuning mode. Press the selector button button to set the tuning mode to "SOUND". [. . . ] DISPLAY : Liquid crystal display and tuning guide 3. TUNING RANGE : Guitar . . . . . . . . . . . . . . . . . . . . . 7B, 6E, 5A, 4D, 3G, 2B, 1E Bass . . . . . . . . . . . . . . . . . . . . . . . . LowB (LB), 4E, 3A, 2D, 1G, HighC (HC) 4. [. . . ]