User manual SEKONIC L-558 CINE QUICK GUIDE

[. . . ] Use the JOG WHEEL to select Custom Setting number (No. )-see chart below. Press Mode Key to Select Item Number (Item #)-see chart below. Turn meter off and then back on to activate functions. [. . . ] Select measuring mode then press measure button. Ambient Reading Select Ambient Mode by holding down the Mode key and turning the JOG WHEEL. Cord Flash Reading Select Cord Flash Mode. Press measure button, to trigger flash and measure light. Cordless Flash Reading Select Cordless Flash mode. Press measure button, trigger flash manually, meter measures light, automatically resets. Radio Triggering Mode (with optional RT-32 Module) Turn power OFF. Remove Connector cover inside battery compartment. Hold MODE key in while turning the JOG WHEEL to RADIO FLASH TRIGGERING MODE, a blinking channel number will appear. Turn JOG WHEEL to select channel number. To select Quad-Triggering sub-channels A , b , c , d , A , ISO 1 b , simply press the direct function keys: AVE/ ISO 2 c or M. Clear d on the control panel. Pressing the measure button once returns the screen to the main menu. Pressing the measure key again simultaneously fires flash and measures light. Memory Function Take measurement, press Memory button. Up to nine readings can be stored and displayed on the analog memory scale by repeating the procedure. A tenth measurement can also be displayed. Advanced Functions - Sekonic L-558 Motion Picture (CINE) Turn JOG WHEEL (in T Priority Mode) past shutter speeds 8000, 1/200, 1/400 to select f/s (frames per second). Averaging Function After two or more measurements are memorized, toggle AVE/ key. Averaged exposure will be displayed in digital and analog readouts. [. . . ] Trugger flash repeatedly until target f/stop is achieved. Exposure Compensation Hold in both ISO 1 and ISO 2 simultaneously and turn the JOG WHEEL to exposure compensation needed between +/- 9. 9 EV. Tap Power button once while holding in ISO 1 and ISO 2 keys. [. . . ]