User manual SENNHEISER ADN

[. . . ] AUDIO DISTRIBUTION NETWORK SENNHEISER ADN Instruction manual Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 The Sennheiser ADN conference system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Available system components ­ scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Overview of the components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you do not want to use a password, leave the "New Password" and "Confirm new Password" fields empty. The new password is saved and the configuration is password-protected. Before any changes to the configuration are accepted, you are prompted to enter the password set. The master key combination allows you to unlock password-protected configurations: Press the key combination "CTRL" + "SHIFT" + "F10". An existing password is deleted. 64 Using the "Conference Manager" software Adjusting network settings If you make changes to the settings in the "Network Settings" window, an existing network connection can be lost!In the menu bar, click "Settings" > "Network. . . ". The "Network Settings" window appears. To automatically integrate the central unit in a network using a dynamic IP address: Select the "Obtain an IP Address automatically" option button. The setting is applied and the "IP Address" and "Subnet mask" fields display the automatically assigned addresses. To manually integrate the central unit in a network using a static IP address: Select the "Use the following IP Address" option button. Enter the desired IP address into the "IP address" field. Enter the desired subnet mask address into the"Subnet mask" field. Click "OK". For further information on the network configuration of the conference system, refer to page 52. Loading the factory default settings In the menu bar, click "Settings" > "Restore Factory Settings". All software settings are reset to default. If the screen connected to the central unit does not show anything, it may be that the screen resolution is set too high. In this case, reset the screen resolution: Press the key combination "CTRL" + "SHIFT" + "F1". The screen resolution is reset to 800 x 600 pixels. 65 Using the "Conference Manager" software Using the conference system and the software Connecting the software to the central unit To connect the "Conference Manager" software to the central unit: Start the software (see page 55). The "Open" window appears. Click "Connect". Or: In the menu bar, click "Global Menu" > "Connect . . . ". The "Connect to CU" window appears, showing a list of available central units. Select the desired central unit. · The "Connect" button is also available in other program windows. Its function is always to connect the "Conference Manager" software to the central unit. The Windows version of the software allows you to select different central units in the network. [. . . ] Sennheiser installed the software on the device and is responsible for how it operates on the device. The Microsoft software was designed for systems that do not require fail-safe performance. You may not use the Microsoft software in any device or system in which a malfunction of the software would result in foreseeable risk of injury or death to any person. This includes operation of nuclear facilities, aircraft navigation or communication systems and air traffic control. [. . . ]