User manual SENNHEISER E 602-II

[. . . ] 602-II Bedienungsanleitung Instructions for use Notice d`emploi Istruzioni per l`uso Instrucciones para el uso Gebruiksaanwijzing 602-II The cardioid 602-II is a dynamic microphone especially suitable for use with kick drums, bass guitar cabs, tubas and other low frequency instruments. [. . . ] The microphone is ideal for direct use on the most problematic bass signal sources. Features Rugged, lightweight aluminium body for stable positioning on long microphone boom arms Lightweight high-performance voice coil construction for fast transient response Low frequency extension Ideal for direct use on the most problematic bass signal sources Frequency-independent directivity provides effective rejection of incidental rear noise Humbucking coil Integral stand mount 3 Delivery includes 602-II microphone Pouch Instructions for use Warranty Certificate Removing the sound inlet basket 4 Positioning the microphone Kick drums Position Resulting sound Much attack, little resonance, dry Commentary Position the microphone at a distance of a few centimeters from the batter head. Less attack, much resonance, smooth, voluminous Position the microphone at the level of the resonant head. Less attack Position the microphone in the middle between the batter head and the re-sonant head. For less attack in all three positions, turn the microphone away from where the beater strikes. In order to prevent interference due to crosstalk between adjacent sound sources, try to position the microphone so that the interfering sound source is located in the angle area of the highest cancellation of the microphone (approx. 180°; see polar diagram). 5 Polar diagram 30° 0° 0 5 10 60° 15 20 25 90° dB 90° 60° 30° 120° 120° 150° 150° 180° 125 250 500 1000 Hz Hz Hz Hz 2000 4000 8000 16000 Hz Hz Hz Hz Frequency response curve dBv - 40 - 50 - 60 - 70 - 80 - 90 20 50 100 200 500 1000 2000 5000 10000 20000 Hz 0°, 1 m 0°, 5 cm 6 Specifications Transducer principle Frequency response Pick-up pattern Sensitivity (free field, no load) Nominal impedance (at 1 kHz) Min. terminating impedance Connector Dimensions Weight dynamic 20. . . . . 16, 000 Hz cardioid 0. 9 mV/Pa (at 50 Hz) 0. 25 mV/Pa (at 1 kHz) 350 1 k XLR-3 Ø 60 x L 153 mm 318 g Pin assignment of XLR-3 connector + + 2 3 1 1 3 2 + + 2 3 1 XLR XLR XLR 7 Overview of microphone applications Variant Application Vocals Choirs Studio, acoustic instruments Orchestra Brass / Saxophone Acoustic guitar Acoustic bass Guitar amplifiers Bass amplifiers Leslie Piano, grand piano Kick drums Snare drums Rack toms Floor toms Congas Cymbals Percussion Overheads x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x e602-II e604 e606 e608 e614 e815 e825 e835 e840 x e845 x x x x 8 e865 x Manufacturer declarations Warranty 2 years Approval Sennheiser electronic GmbH & Co. KG declare that this device is in compliance with the applicable CE standards and regulations. WEEE Declaration Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling centre for such equipment. 9 10 Sennheiser electronic GmbH & Co. [. . . ] KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www. sennheiser. com Printed in Germany Publ. [. . . ]