User manual SENNHEISER EK 100 G3

[. . . ] EK 100 Instruction manual Instruction manual Notice d'emploi Istruzioni per l'uso Instrucciones de uso Gebruiksaanwijzing Manual de instruções Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The EK 100 G3 diversity receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 The frequency bank system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Areas of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Display Squelch is . . . RF AF P P 823. 925 MHz ew100 G3 MUTE . . . The dotted line goes off and the audio level display "AF" shows full deflection (hissing noise). displays the squelch 823. 925 MHz ew100 G3 RF AF If you have accidentally switched off the squelch: Press the UP rocker button to switch the squelch on. Scanning for, releasing and selecting frequency presets ­ "Easy Setup" Menu item Reset List Current List Function of the menu item Releases all locked frequency presets Selects an unused frequency preset Scan New List Automatically scans for unused receiving frequencies (frequency preset scan). If receiving frequencies are used, they will be locked; if receiving frequencies are unused, they will be released. After the frequency preset scan, you can select an unused frequency preset. Selecting the frequency bank and the channel ­ "Frequency Preset" Menu Frequency Preset B. Ch: 1. 1 Call up "Frequency Preset" SET Frequency Preset B. Ch: 1. 1 823. 925MHz Select the frequency bank and confirm SET Frequency Preset B. Ch: 2. 2 823. 925MHz Select the channel; store the setting SET "Stored" When setting up multi-channel systems, please observe the following: Only the factory-preset receiving frequencies within one frequency bank ("1" to "20") are intermodulation-free. It is vital to observe the notes on frequency selection on page 19. Overview of the frequency banks and channels: Frequency bank "1" to "20" "U" Channels up to 12 per frequency bank up to 12 Type System bank: frequencies are factory-preset User bank: frequencies are freely selectable 15 Adjusting settings via the operating menu Entering a name ­ "Name" Menu Name Lichael Name Lichael Enter a character and confirm Name Michael Enter a character; store the setting Call up "Name" "Stored" Via the "Name" menu, you can enter a freely selectable name (e. g. the name of the performer) for the receiver. The name is displayed on the standard display (see page 6). The name can consist of up to 8 characters such as: · letters (without pronounciation marks), · numbers from 0 to 9, · special characters and spaces. To enter a name, proceed as follows: Press the rocker button to select a character. SET Press the SET button to change to the next segment/character or to store the complete entry. Adjusting the audio output level ­ "AF Out" Menu AF Out SET 0 dB AF Out 0 dB Select the desired setting AF Out + 60 dB dB Store the setting SET Call up "AF Out" "Stored" Adjustment range: ­30 dB to +12 dB, adjustable in 6-dB steps Via the "AF Out" menu item, you can adjust the level of the audio output Line from the receiver to the input of the connected camera. Activating/deactivating the automatic lock mode ­ "Auto Lock" Menu Auto Lock Active Call up "Auto Lock" SET Auto Lock Active Select the desired setting Auto Lock Inactive Store the setting SET "Stored" The lock mode prevents that the diversity receiver is accidentally switched off or programed during operation. The lock mode icon on the current standard display indicates that the lock mode is activated. For information on how to use the lock mode, refer to page 10. The extended menu "Advanced Menu" To get into the extended menu "Advanced Menu": From the main menu, select "Advanced". Setting the receiving frequencies for the frequency bank "U" ­ "Tune" When you have selected one of the system banks and then select the "Tune" menu, the diversity receiver automatically switches to channel 1 of the frequency bank "U". In this case, "U. 1" briefly appears on the display panel. Upon delivery, the channels of the frequency bank "U" are not assigned a receiving frequency. 16 Adjusting settings via the operating menu Via the "Tune" menu item, you can set a receiving frequency to be stored in the current channel or you can select a different channel in the frequency bank "U" and assign this channel a receiving frequency. Setting a receiving frequency for the current channel Press the rocker button until the "Tune" menu item appears. SET Press the SET button. The MHz section of the receiving frequency of the channel is highlighted. SET Advanced Menu Tune 823. 925 MHz Call up "Tune" (special function) Tu n e 823. 925 MHz B. Ch: U1. 1 Select the frequency bank and confirm SET Tu n e 823. 925 MHz B. Ch: U1. 1 Select the channel; store the setting SET "Stored" It is vital to observe the notes on frequency selection on page 19. Press the rocker button to set the MHz section of the frequency. SET Press the SET button to confirm the MHz section of the frequency. The kHz section of the frequency is highlighted. [. . . ] 65 dB 70 dB Off, Low: 5 dBV, Middle: 15 dBV, High: 25 dBV can be switched off Receiving frequencies Intermodulation attenuation typ. 65 dB AF characteristics Compander system S/N ratio (1 mV, peak deviation) THD Sennheiser HDX 60 dBA 0. 9% AF output voltage 3. 5 mm jack socket: +11 dBu (at peak deviation, 1 kHz AF) (mono, unbalanced) Adjustment range of audio output level 42 dB, adjustable in steps of 6 dB Overall device Temperature range Power supply Nominal voltage Power consumption: · at nominal voltage typ. 140 mA · with switched-off receiver 25 A ­10°C to +55°C 2 AA size batteries, 1. 5 V or BA 2015 accupack 2. 4 V 23 Manufacturer Declarations Operating time Dimensions Weight (incl. 120 g In compliance with Europe EMC: Radio: USA EN 301489-1/-9 EN 300422-1/-2 Safety: EN 60065 47 CFR 15 subpart B Approved by Canada Industry Canada RSS 123 IC 2099A-G3EK100 limited to 806 MHz Connector assignment 3. 5 mm jack plug wired stereo wired mono + NC + Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. [. . . ]