User manual SENNHEISER EVOLUTION WIRELESS EW 100

[. . . ] 12 Selecting a standard display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using the operating menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 The buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Overview of the operating menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the lock mode is activated, you have to temporarily deactivate it in order to be able to operate the plug-on transmitter: ON/OFF SET Press the SET button or the ON/OFF button. "Locked" appears on the display panel. "Unlock?" appears on the display panel. SET Press the SET button. The lock mode is temporarily deactivated. ­ When you are in the operating menu, the lock mode remains deactivated until you exit the operating menu. ­ When one of the standard displays is shown, the lock mode is automatically activated after 10 seconds. EVOLUTION WIRELESS EW 100 | 11 Using the plug-on transmitter The lock mode icon 5 flashes prior to the lock mode being activated again. 543. 850 MHz ew300 G3 AF P MUTE Muting the audio signal or deactivating the RF signal 9 The MUTE switch 9 allows you to mute the audio signal or to deactivate the RF signal. Via the "Mute Mode" menu item, you can set the desired function of the MUTE switch 9 (see page 21). Setting "AF On/Off" Slide the MUTE switch 9. . . to the left (position MUTE) Function Mutes the audio signal Unmutes the audio signal Deactivates the RF signal (offline operation) Activates the RF signal (online operation) . . . to the right "Disabled" No function From the "Mute Mode" menu item, select the desired setting (see page 21). Slide the MUTE switch 9 to the left, to the position MUTE. The lock mode icon 5 on the current standard display indicates that the lock mode is activated. Press the UP/DOWN to select the desired setting. For information on how to use the lock mode, refer to page 11. The extended menu "Advanced Menu" Setting the transmission frequencies for the frequency banks "U1" to "U6" ­ "Tune" When you have selected one of the system banks and then select the "Tune" menu item, the plug-on transmitter automatically switches to channel 1 of the frequency bank "U1". In this case, "U1. 1" briefly appears on the display panel. Upon delivery, the channels of the frequency banks "U1" to "U6" are not assigned a transmission frequency. When you are in the "Tune" menu item, the RF signal is deactivated. Via the "Tune" menu item, you can: 1. set a transmission frequency to be stored in the current channel of the frequency bank ("U1" to "U6") 2. or select a frequency bank ("U1" to "U6") and a channel and assign this channel a transmission frequency. It is vital to observe the notes on frequency selection on page 23. EVOLUTION WIRELESS EW 100 | 19 Adjusting settings via the operating menu Setting a transmission frequency for the current channel Press the UP/DOWN button until the "Tune" menu item appears. SET Press the SET button. The frequency selection appears. Tu n e 543 . 850 MHz B. Ch: U1. 1 Select the MHz value and confirm Advanced Menu Tune Call up "Tune" Tu n e 543. 850MHz B. Ch: U1. 1 Select the kHz value; store the setting "Stored" Set the desired frequency. SET Press the SET button. [. . . ] Adjust the input sensitivity (see page 17). If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at www. sennheiser. com under "Service & Support". 28 | EVOLUTION WIRELESS EW 100 Specifications Specifications RF characteristics wideband FM 516­558, 566­608, 606­648, 626­668, 734­776, 780­822, 823­865 MHz (A to E, G, GB, see page 4) Transmission 1, 680 frequencies, tuneable in frequencies steps of 25 kHz 20 frequency banks, each with up to 24 factory-preset channels 6 frequency banks with up to 24 user programmable channels Switching bandwidth up to 42 MHz Nominal/peak deviation ±24 kHz / ±48 kHz Frequency stability ±15 ppm RF output power at switchable: 50 typ. 30 mW ("Standard") Pilot tone squelch can be switched off AF characteristics Compander system Sennheiser HDX AF frequency response 80 to 18, 000 Hz Signal-to-noise ratio (1 mV, peak deviation) 120 dBA THD 0. 9% Max. input voltage 6 Vrms Input impedance 6 k, balanced Adjustment range of 48 dB, adjustable in steps of input sensitivity 6 dB Overall device Temperature range Power supply Nominal voltage Power consumption ­10°C to +55°C 2 AA size batteries, 1. 5 V or BA 2015 accupack 2. 4 V at nominal voltage: · typ. [. . . ]