User manual SENNHEISER EW 112-P G2

[. . . ] W 100 Instructions for use Safety instructions Never open electronic units!If units are opened by customers in breach of this instruction, the warranty becomes null and void. Keep the units away from central heating radiators and electric heaters. Use a damp cloth for cleaning the units. [. . . ] The battery compartment cover into place with an audible click. locks ¾ º Switching the plug-on transmitter on/off Press the ON/OFF button LED lights up. The red until To switch the plug-on transmitter off, press the ON/OFF button "OFF" appears on the display. The red LED goes off. ¶ º 22 Switching the radiomicrophone on/off ¸ ¹ Turn the protective cap at the bottom of the radiomicrophone so that the ON/OFF button ¹ becomes accessible. Press the ON/OFF button to switch the radiomicrophone on. To switch the radiomicrophone off, press the ON/OFF button ¹ until "OFF" appears on the display. The red LED ¸ goes off. ¶ Muting the transmitters All transmitters have a MUTE switch that noiselessly mutes the transmitter's audio signal without switching the transmitter off. SK 100 G2 Muting the SK 100 G2 and SKP 100 G2 transmitters Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. SKP 100 G2 Set the MUTE switch back to the original position to retransmit the audio signal. Muting the SKM 100 G2 radiomicrophone Turn the protective cap at the bottom of the radiomicrophone so that the MUTE switch becomes accessible. Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. Set the MUTE switch back to the original position to retransmit the audio signal. ¶ Activating/deactivating the lock mode All transmitters and receivers have a lock mode that can be activated or deactivated via the operating menu (see: , , Activating/deactivating the lock mode" on page 35). The lock mode prevents that the transmitter or receiver is accidentally programmed or switched off during operation. 23 Attaching the components to clothing Attaching the bodypack receiver/transmitter to clothing The bodypack receiver/transmitter is attached to clothing (e. g. belt, waistband) with the supplied belt clip. The clip is detachable so that you can also attach the bodypack receiver/ transmitter with the antenna pointing downwards. To do so, withdraw the clip from its fixing points and attach it the other way round. The BPP 1 bodypack pouch (available as an accessory) helps to protect the bodypack receiver/transmitter against moisture. 24 The operating menu A special feature of the Sennheiser ew 100 G2 series is the similar, intuitive operation. As a result, the units are easy to operate and adjustments to the settings can be made quickly and "without looking" ­ even in stressful situations, for example on stage or during a live show or presentation. The buttons Buttons ON/OFF or POWER (EM 100 G2 only) SET Mode Standard display Operating menu Setting mode Standard display Operating menu Setting mode Standard display / Operating menu Setting mode To . . . turn the transmitter or receiver on and off cancel the entry and return to the standard display cancel the entry and return to the standard display get into the operating menu get into the setting mode of the selected menu store the settings and return to the previous menu level without function change to the previous menu ( ) or change to the next menu ( ) adjust the setting of the selected menu: option ( / ) Overview of menus Display BANK CHAN TUNE SCAN SENSIT AF OUT SQELCH DISPLY NAME RESET PILOT LOCK EXIT Receivers Switching between channel banks Switching between the channels in a channel bank Setting a receiving frequency for the channel bank "U" (user bank) Scanning the selected channel bank for free channels Transmitters Switching between channel banks Switching between the channels in a channel bank Setting a transmission frequency for the channel bank "U" (user bank) Adjusting the sensitivity (AF) Adjusting the audio output level Adjusting the squelch threshold Selecting the standard display Entering a name Loading the factory-preset default settings Activating/deactivating the pilot tone evaluation Activating/deactivating the lock mode Exiting the operating menu and returning to the standard display Selecting the standard display Entering a name Loading the factory-preset default settings Activating/deactivating the pilot tone transmission Activating/deactivating the lock mode Exiting the operating menu and returning to the standard display 25 Working with the operating menu By way of example of the "TUNE" menu, this section describes how to use the operating menu. [. . . ] 30 mW SKP 100 G2 SKM 100 G2 1. 8 Vrms, unbalanced 1. 2 Veff, unbalanced ­ 2. 4 Vrms 10 k, unbalanced 1 M 10 k, unbalanced ­ ­ ­ ­ ­ 2 AA size batteries, 1. 5 V 2. 4 V 2. 4 V 170 mA 250 A 250 A >8h >8h 82 x 64 x 24 approx. 158 g >8h >8h 105 x 43 x 43 approx. 195 g 2. 4 V 250 A >8h >8h 50 x 225 approx. 450g Connector assignment EM 100 G2: EM 100 G2: ¼'' (6. 3 mm) stereo jack plug, unbalanced ¼'' (6. 3 mm) mono jack plug, unbalanced EM 100 G2: XLR-3F connector, balanced + 2 3 1 EM 100 G2: DC connector for power supply NC/GN D SK 100 G2: 3. 5 mm jack plug EK 100 G2: 3. 5 mm stereo jack plug, unbalanced EK 100 G2: 3. 5 mm mono jack plug, unbalanced 43 Polar diagrams and frequency response curves of microphones/microphone heads Polar diagrams of microphones/microphone heads MD 835 ME 865 ME 3 MD 845 ME 4 Frequency response curves of microphones/microphone heads MD 835 ME 2 MD 845 ME 3 ME 865 ME 4 44 Accessories MD 835 Microphone head for SKM 100 G2 (green identification ring), dynamic, cardioid MD 845 Microphone head for SKM 100 G2 (blue identification ring), dynamic, super-cardioid ME 865 Microphone head for SKM 100 G2 (red identification ring), condenser, super-cardioid MZW 1 Wind- and popshield for SKM 100 G2 MZQ 1 Microphone clamp for SKM 100 G2 ME 2 Clip-on microphone for SK 100 G2, condenser, omni-directional ME 4 Clip-on microphone for SK 100 G2, condenser, cardioid ME 3 Headmic for SK 100 G2, condenser, super-cardioid CI 1 Instrument cable for SK 100 G2, with ¼" (6. 3 mm) jack plug CL 2 Line input cable for SK 100 G2, with XLR-3F connector CL 100 Line input cable for EK 100 G2, with XLR-3M connector GA 2 19" rack adapter AM 2 Antenna mount for mounting antennas to the front of the GA 2 A 1031-U UHF antenna, passive, omni-directional, can be mounted onto a stand AB 2-A UHF antenna booster, 10 dB gain powered via ASP 2/NT1 AB 2-B AB 2-C AB 2-D AB 2-E GZL 1019-A1 / 5 / 10 Antenna cable with BNC connectors 1 m / 5 m / 10 m ASP 2 Antenna splitter, 2 x 1:4, passive, for connecting four EM 100 G2 to two A 1031-U/AB 2 NT 1 Mains unit for ASP 2 DC 2 DC power adapter, for external 12 V DC powering of SK 100 G2 (instead of two AA size batteries) BA 2015 Accupack for EK 100 G2, SK 100 G2, SKP 100 G2, SKM 100 G2 L 2015 Charger for BA 2015 accupack CC 2 Carrying case for ew 100 G2 system KEN 8 color-coded identification caps for SKM 100 G2 518­554 MHz 626­662 MHz 740­776 MHz 786­822 MHz 830­866 MHz 45 Manufacturer declarations Warranty regulations The guarantee period for this Sennheiser product is 24 months from the date of purchase. [. . . ]