Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SENNHEISER HZA 450. We hope that this SENNHEISER HZA 450 user guide will be useful to you.
Lastmanuals help download the user guide SENNHEISER HZA 450.
Detailed instructions for use are in the User's Guide.
[. . . ] Once turned on, the HZA 450 is ready to transmit. This system is designed to be used on table tops or any flat surface. [. . . ] A carrying handle has been provided for easy portability from room to room. For better coverage in large halls, the HZA 450 can be mounted on a heavy duty microphone or speaker stand and be raised as high as necessary. A threaded 3/8" insert for this is located on the base of the unit. The HZA 450 can accept both balanced microphone inputs and -10dB high impedance line inputs. The microphone input passes directly to the microphone preamp. The line input features a variable line input level control and is transformer isolated for protection against improperly grounded systems. Master / Slave Options The HZA 450 can be used as a Master unit, when used alone; or, as a Slave emitter when used with a separate modulator (e. g. , SI1015 rack mount modulator). Please note: only the modulator accepts the original audio program directly. When using the HZA 450 as a master unit, position "Master" switch (see line drawing) in the Master position.
To increase the infrared coverage for larger areas when the HZA 450 is being utilized as a Master unit, connect a 50 Ohm Coax cable from the BNC output (see line drawing) to the BNC input of an emitter (SZI1015, SZI1029, etc. ). To use the HZA 450 as an emitter only, move the "Master" selector switch (see line drawing) to the Slave position. By doing this, the modulator is disconnected allowing use of separate modulator. Then, connect the RF audio signal output of a modulator to the "In" BNC connector (see line drawing). [. . . ] Then, connect the RF audio signal output of a modulator to the "In" BNC connector (see line drawing). System Placement Place the HZA 450 on a table, floor stand, or wall mount at the front of the room, in the center, at eye level (or higher) in a slightly downward fashion facing the audience. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SENNHEISER HZA 450
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SENNHEISER HZA 450 will begin.
