User manual SENNHEISER MKH 8060

[. . . ] 8 The MZD 8000 digital module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Transporting the microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Cleaning and maintaining the microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Only use the product within the specified temperature range (see "Specifications" on page 11). · · After operation · Use the product with care and store it in a clean, dust-free environment. Intended use Intended use includes: · · having read this instruction manual, especially the chapter "Important safety information", using the product within the operating conditions and limitations described in this instruction manual. "Improper use" means using the product other than as described in this instruction manual, or under operating conditions which differ from those described herein. 2 | MKH 8060 The MKH 8060 The MKH 8060 The MKH 8060 is a short gun microphone from the modular MKH 8000 microphone series that convinces with its excellent directivity and especially natural sound. The microphone's special design ensures that off-axis sound is attenuated without colorations. The MKH 8060 is especially suitable for voice recording applications in film and TV, both in the studio and outdoors. The microphone operates on the RF principle that has been used by Sennheiser for more than 50 years, now brought to the highest level of perfection. Among the many advantages of this principle are an extremely low inherent self-noise, the capability to handle high sound pressure levels without distortion and a high resistance to adverse climatic conditions. · · · · · · · · · · · · Super-cardioid/ lobar pick-up pattern Very natural sound Off-axis sound is attenuated without colorations while a uniform sound structure is maintained Can be used as an analog or ­ with the digital module ­ digital microphone Exceptionally low inherent self-noise prevents masking of delicate sound structures Symmetrical transducer technology ensures extremely low distortion Transformerless and fully floating balanced output: no coupling of spurious signals, minimal distortion High output signal voltage ensures interference-free signal paths Rugged metal housing with non-reflective Nextel coating Extremely weather-proof due to high-frequency circuit Ideal for camera mounting due to compact design Versatile use due to the extensive range of accessories of the MKH 8000 series, e. g. : ­ MZD 8000 digital module ­ MZF 8000 filter module ­ Windshield systems ­ Shock mounts A list of accessories can be found on the MKH 8060 product page at www. sennheiser. com. For information on suppliers, contact your local Sennheiser partner: www. sennheiser. com > "Service & Support". MKH 8060 | 3 Delivery includes Delivery includes Microphone, consisting of the MKH 8060 microphone head and the MZX 8000 XLR module MZQ 8060 microphone clamp MZW 8060 foam windshield MKH 8060 Directional studio microphone Instruction manual Instruction manual dB -10 -20 -30 -40 -50 -60 50 Hz Frequency response sheet 100 Hz 100 200 Hz 500 Hz 1. 00 1 kHz Threaded transport tube 4 | MKH 8060 Product overview Product overview 1 2 3 4 1 Foam windshield 2 Microphone head 3 XLR module 4 Microphone clamp (thread adaptor included for 3/8" and 5/8" threads) MKH 8060 | 5 Putting the MKH 8060 into operation Putting the MKH 8060 into operation Connecting the microphone Connection data of the MKH 8060: · · 48 V ± 4 V phantom powering (P48, as per IEC 61938) XLR-3 connector, balanced To connect the MKH 8060 to a mixing console or recording device: Connect the socket of the microphone cable to the microphone. Connect the connector of the microphone cable to the mixing console or recording device. Attaching the microphone Select the suitable mounting thread: ­ Without thread insert: 5/8" thread ­ Thread insert: 3/8" thread Screw the microphone clamp 4 to a stand. Place the microphone with its back end into the microphone clamp: Make sure that the lateral slots are not covered. Orient the microphone together with the microphone clamp and fix them by screwing the wing screw tight. 4 6 | MKH 8060 Putting the MKH 8060 into operation To suppress structure-borne noise, you can use one of the optional shock mounts. Sennheiser MZS 20-1 Sennheiser MZS 40 Using the windshield The windshield changes the sound only slightly, but attenuates wind noise by approx. Place the MZW 8060 foam windshield 1 over the microphone head 2 so that all lateral slots are covered. 1 2 Alternative windshields are available as accessories and can be found on the MKH 8060 product page at www. sennheiser. com. MKH 8060 | 7 Using optional modules Using optional modules You can retrofit and extend the microphones of the modular MKH 8000 microphone series by using optional modules. The MZF 8000 filter module The MZF 8000 filter module has been specially designed for broadcast and film applications. It effectively filters out interference caused by infrasound, such a lowfrequency wind and handling noise. If necessary, disconnect a connected XLR cable in order to not distort the cable and to avoid short-circuits. Unscrew the microphone head 2 from the XLR module 3. Screw the MZF 8000 filter module 4 at a suitable place in the audio signal chain between microphone head and XLR module. 2 4 3 8 | MKH 8060 Using optional modules The MZD 8000 digital module The MZD 8000 digital module is an A/D converter for all microphone heads of the MKH 8000 series. The sound of the MKH 8000 series is converted to digital directly at the microphone head, ensuring that the warm, natural, yet clear and powerful sound of the microphones is maintained in full quality along the entire signal chain. The MZD 8000 digital module eliminates cable losses and, most importantly, features a converter and surrounding circuitry that have been optimally matched to the microphone. [. . . ] For the current warranty conditions, please visit our website at www. sennheiser. com or contact your Sennheiser partner. In compliance with the following requirements · RoHS Directive (2002/95/EC) · WEEE Directive (2002/96/EC) Please dispose of this product by taking it to your local collection point or recycling center for such equipment. CE Declaration of Conformity · EMC Directive (2004/108/EC) The declaration is available at www. sennheiser. com. In compliance with: Europe USA Canada China Australia/ New Zealand EMC EN 55103-1/-2 FCC 47 CFR 15 subpart B Industry Canada ICES_003 MKH 8060 | 13 Manufacturer Declarations This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. [. . . ]