User manual SENNHEISER MM 200

[. . . ] Instruction Manual MM 200 Headset Bluetooth Stereo Quick Setup Guide 1 Charging 3h 2a Pairing 2b 5s 20 cm 2c MM 200 OK Keyword 0000 2d English Contents Important safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Delivery includes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Operating elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Once paired, most mobile phones are able automatically transfer the audio to the headset and, in addition, show a headset symbol in their display. Pairing is not successful If pairing is not successful within 60 seconds, the headset returns into idle mode. On the mobile phone, start a search for Bluetooth devices (see the manual of your mobile phone) and follow any instructions displayed on the mobile phone display. Pairing to other Bluetooth audio devices If you wish to pair the headset to other Bluetooth devices such as portable music players or laptops, please refer to the manual of the Bluetooth audio device. 32 The MM 200 can simultaneously be paired to up to 2 devices, one supporting the HF/HS profile and one supporting the A2DP, e. g. Pair the MM 200 to one of the devices (see "Pairing the headset" on page 29). If the MM 200 is only paired as either a HFP/HSP or an A2DP device, you can pair it to a secondary Bluetooth device. When the headset is in standby mode (i. e. no active call and no music streaming), press the Next button ´ or Prev. The LED ¹ flashes alternatingly in red and blue, indicating that the headset is in pairing mode and ready to pair the secondary device. Follow the steps described under "Pairing to a mobile phone" on page 30, or the steps described in the manual of any other device. Multi-pairing ¶ ´ 33 Operating Replacing the earpads For reasons of hygiene, the ear pads should be replaced from time to time. Spare ear pads are available from your Sennheiser Communications dealer. Carefully remove the ear pads from the ear canal phones. Mount the new ear pads to the ear canal phones. The headset comes with ear pads in 3 different sizes: S, M and L. M size ear pads are already mounted to the ear canal phones. 34 Wearing the headset Danger of accidents!The headset can draw off your attention. Do not wear the headset in an environment that requires your special attention (e. g. in traffic or when performing skilled jobs)!Put the lanyard around your neck so that the microphone » is on your left hand side. To ensure that the operation buttons always face outward, you can twist the safety clip on the lanyard accordingly. If required, fasten the operating unit ¾ to your clothing with the detachable clothing clip ¸. Note on the sound quality: The perceived sound quality and bass performance of the ear canal phones depend largely on the correct fit of the ear canal phones in the ear. CAUTION! 35 For best sound enjoyment, please use the supplied ear pads of the appropriate size (see "Replacing the earpads" on page 34). CAUTION! Danger of injury! [. . . ] The guarantee is void if the product is manipulated by nonauthorised persons or repair stations. In the case of a claim under the terms of this guarantee, send the device, including accessories and sales receipt, to the responsible service partner. To minimise the risk of transport damage, we recommend that the original packaging is used. Your legal rights against the seller, resulting from the contract of sale, are not affected by this guarantee. [. . . ]