User manual SENNHEISER MMD 945

[. . . ] Three-channel receiver, three switchable frequencies in the range between 48 and 50 MHz Two-channel receiver, switchable, for two approved frequencies in France Single-channel receiver with the following frequencies: 36. [. . . ] 98 MHz Single-channel rceiver, frequency chosen by customer Single-channel rceiver, version for an approved frequency in France Single-channel receiver, version for an approved frequency in the UK Three-channel receiver, three switchable frequencies (36 - 50 MHz) Putting the receiver into operation Insert accuplug . After use If you are not going to use the MMD 945 for a period, please switch it off by turning the volume control off until it clicks . Changing the identification markers To easily distinguish between receivers that have been set to different frequencies a set of colour-coded identification markers KEN 1030 can be used for labelling the different frequencies. Since the markers are inserted into the front of the receiver, the different frequencies can be clearly recognized even from a distance. Cleaning and replacing the ear pads The ear pads can be removed from the receiver and cleaned with soapy water or sterilised by using the same solution as is used by mothers to sterilise the teat of a babies bottle. Rinse under clear water, then let dry well. Replacement ear pads can be obtained directly from your local Sennheiser agent. MMD 945 MMD 945 F 1 MMD 945 UK 1 Nominal deviation AF frequency response Maximum sound pressure level at 1 kHz THD at nominal deviation and 1 kHz Signal-to-noise ratio at nominal deviation and 500 µV antenna voltage Power supply Current consumption Operating time Dimensions (in mm) / Weight Supply schedule [. . . ] Replacement ear pads can be obtained directly from your local Sennheiser agent. [. . . ]