User manual SENNHEISER MX W1

[. . . ] digital wireless system MX W1 Instruction manual Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 MX W1 digital wireless earphone system . . . . . . . . . . . . . . . . . . . . . . . . . 4 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Only charge the docking station using the power supply unit . µ ´ To charge the devices (simultaneously or separately): Connect the charging cable to the power supply unit . Connect the suitable country adaptor to the power supply unit . Connect the charging cable to the charging jack of: ­ the transmitter µ and the docking station ­ or the earphones ´. If you want to charge all devices at one go, insert the earphones into the charging compartments of the docking station. 7 Plug the country adaptor into a wall socket. Charge the rechargeable batteries until the LEDs go off (approx. Note: ­ The transmitter has its own built-in rechargeable battery. So it will not drain your audio device's battery. ­ With a fully charged rechargeable battery, the operating time of the transmitter is approx. Charging the earphones on the move When on the move, the earphones can be charged up to three times in the docking station, without the docking station having to be connected to the mains. » Insert the earphones into the charging compartments of the docking station. Make sure that the earphones are inserted correctly. Press the charging button to start charging. The rechargeable batteries are being charged. Charge the rechargeable batteries until the LEDs go off. 8 Associating the earphones to the transmitter (Pairing) The MX W1 earphones and transmitter are already paired on delivery. To enable wireless transmission, both the earphones and the transmitter have to recognize each other: 1. Enrollment mode After switch-on, a suitable device is searched. 0 1s 2s 2. Association mode If a suitable device is detected, both devices will exchange device identification information. 0 1s 2s 3. Pairing mode If the exchange of device identification information is possible, the devices automatically try to connect. 0 5s 10s 9 Associating a second pair of earphones to the transmitter With one transmitter you can associate up to two pairs of earphones. If you want to use another pair of earphones, you have to pair your transmitter and the new earphones: Switch the new earphones off (see page 14). Switch the transmitter and the already paired earphones on (see page 14). ON ON OFF Switch the transmitter off (see page 14). 4s ON OFF OFF Press and hold the operation/pairing button of the new earphones until the LEDs flash rapidly. ON OFF 7s ON 10 Press and hold the operation/pairing button of the transmitter until the LED flashes rapidly. 7s ON ON ON After approx. 3 seconds, the new earphones are also paired to the transmitter. [. . . ] 29 x 20. 5 x 51 mm 23 Docking station Charging time of rechargeable battery Power supply Weight Dimensions approx. 2 hrs Input: 5 V DC/400 mA Output: 5 V DC/100 mA approx. 71 x 26 x 74 mm "kleer" wireless technology The MX W1 is based on "kleer" digital wireless transmission technology. · Multiple (stereo) earphones capability · Lossless sound transmission (CD quality) · Smaller size of the devices · Lower battery consumption The Kleer logo is a trademark of Kleer Inc. Manufacturer declarations Warranty 2 years Declaration of Conformity This equipment is in compliance with the essential requirements and other relevant provisions of Directives: · R&TTE directive (1999/5/EC) · EMC Directive (2004/108/EC) · Low Voltage Directive (2006/95/EC) · RoHS Directive (2002/95/EC) · WEEE Directive (2002/96/EC). [. . . ]