Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SENNHEISER MZA 10. We hope that this SENNHEISER MZA 10 user guide will be useful to you.
Lastmanuals help download the user guide SENNHEISER MZA 10.
Detailed instructions for use are in the User's Guide.
[. . . ] This means that condenser microphones can be connected to equipment which does not have its own microphone power supply output, as for example film cameras, video recorders, and portable mixer. [. . . ] This means that condenser microphones can be connected to equipment which does not have its own microphone power supply output, as for example film cameras, video recorders, and portable mixer. E in the followlng models: MZA 10T 12 V A-B supply, with 3-pole DIN connector (Tuchei) MZA 10T U As the MZA 10 T, but with XLR connector (Cannon) MZA16P48 48 V phantom power supply, with 3-pole DIN connector (Tuchei) MZA 10 P48 U As the MZA 10 P 48, but with XLR connector (Cannon) These battery adapters are suitable for all weil known condenser microphones. The MZA 10 has, as its main component, a high efflciency voltage convertor (> 80 %), which converts the 9 volts of the dry battery to 12 volts for A-B powering or 48 volts for phantom powenng. The low frequency filter allows different settings at 50 Hz as foßows; swilch seno "140 Hz" gives - 14 dB and switch setting "80 Hz" gives - 8 dB (with respect to 1 kHz). Since the low frequency filter not only reduces interference noise, but also bass frequencies wh ich would otherwise be reproduced, it should be only switched on when other measures prove to be insufficient (e. Is not lower than 600 Q, Filter slope Bass cul at 50 Hz In sWltch position 20 Hz 80 Hz 140 Hz NOlse voltage al the output lor load Impedance 1 kQ, symmetncal Converter Irequency residual voltage at output wlth 10 mA mlcrophone supply Maximum output level when Output voltage Maximum supply current to mlcrophone Powersupply Converter closed ClrcUlt current (wlthout mlcrophone) Operating duratIon wlth Alkall-Manganese ballerIes Converter Irequency Output Impedance Minimum load Impedance Attenuator limit bass Filter Bass Irequencles (- 3 dB) 01 IIlter slape cut at 50 Hz In sWltch 20 Hz 80 Hz 140 Hz NOlse voltage at the output lor load Impedance 1 kQ, symmetrleal Converter Irequency residual voltage at output wlth 10 mA mlerophone supply Maximum output level when THD 1 % and RL I kQ Welght (wlth ballery) Dimensions (In mm) [. . . ] Since the low frequency filter not only reduces interference noise, but also bass frequencies wh ich would otherwise be reproduced, it should be only switched on when other measures prove to be insufficient (e. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SENNHEISER MZA 10
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SENNHEISER MZA 10 will begin.
