User manual SENNHEISER MZB 30

[. . . ] 11 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Manufacturer Declarations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Thank you for choosing Sennheiser!We have designed this product to give you reliable operation over many years. [. . . ] Do not use the product in situations which require special attention (e. g. in traffic or when performing skilled jobs). Always keep the product dry and do not expose it to extreme temperatures (normal operating temperatures: 10°C/50°F to 35°C/95°F). Use the product with care and store it in a clean, dust-free environment. The headphones contain magnets that generate a magnetic field which could cause interference with cardiac pacemakers and implanted defibrillators. Keep the headphones at least 1. 2" (3 cm) from cardiac pacemakers or implanted defibrillators Please protect your hearing from high volume levels. Sennheiser headphones also sound exceptionally good at low volumes. · · · · · Intended use Intended use of this product includes · having read this instruction manual, especially the chapter "Important safety information", · using the product within the operating conditions and limitations described in this instruction manual. "Improper use" means using the product other than as described in this instruction manual, or under operating conditions which differ from those described herein. 2 Important safety information Safety instructions for standard batteries If abused or misused, batteries may leak and, in extreme cases, may even present an explosion and fire hazard. Sennheiser does not accept any liability for damage arising from abuse or misuse. Keep away from children. Do not short-circuit. Do not heat above 70°C/158°F, e. g. do not expose to sunlight or throw into a fire. Use the ­ VOLUME + ´ control to set the volume to a comfortable level. 8 Using the MZB 30 Vol + Vol ­ ´ Switching NoiseGard on and off To switch NoiseGard on: Move the NoiseGard On ­ Off ² switch to the On position. To switch NoiseGard off: Move the NoiseGard On ­ Off ² switch to the Off position. The LED goes off. ² On Off When the battery is almost empty, the LED flashes red. NoiseGard will continue to function for approximately 2 hours. When the battery is completely discharged, the NoiseGard active noise compensation automatically switches off. Audio will still be heard through the headphones. 9 Transporting the MZB 30 Transporting the MZB 30 For space-saving transportation, the headphones can be folded up flatly and compactly. Match up the notches in the headband to secure the headphones for transport. Place the headphones flat into the transport case. 10 Cleaning the MZB 30 Cleaning the MZB 30 CAUTION Liquids can damage the electronics of the product!Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids away from the product. Only use a soft, dry cloth to clean the product. Replacing the ear pads You can replace the ear pads. [. . . ] 50 hours 0°C/32°F to 40°C /104°F 12 Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www. sennheiser. com or contact your Sennheiser partner. In compliance with the following requirements · · · RoHS Directive (2002/95/EC) WEEE Directive (2002/96/EC) Battery Directive (2006/66/EC) CE Conformity · · EMC Directive (2004/108/EC) The declaration is available on the Internet at www. sennheiser. com. [. . . ]