User manual SENNHEISER PXC 360 BT

[. . . ] Instruction manual PXC 360 BT Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PXC 360 BT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To switch the headphones off: 1 5 Press the Master button and keep it pressed until the LED flashes 3 times red. The Bluetooth connection is automatically deactivated. To switch the Bluetooth function off: Press the Bluetooth button ² and keep it pressed until the flashes 3 times red. LED ² The Bluetooth button ² goes off. The Bluetooth function is switched off. 15 Putting the PXC 360 BT into operation Connecting the PXC 360 BT using the audio cable Connecting the audio cable You can connect the headphones to the audio source using the audio cable if: · · you do not want to use the Bluetooth function, you are not allowed to use the Bluetooth function (some airlines do not allow Bluetooth transmission) or · the battery pack is flat. When the audio cable is connected to the headphones, the Bluetooth function cannot be switched on. 1 If the headphones are already connected to the audio source via the Bluetooth interface, the Bluetooth connection is automatically disconnected when you connect the audio cable. The LED flashes 3 times red and you hear a descending beep. Connect the 2. 5 mm jack plug of the audio cable to the socket ´ of the headphones. Connect the 3. 5 mm jack plug of the audio cable Music Photos Videos Extras Settings Shuffle Songs to if the 3. 5 mm jack ­ the headphone socket of your audio source or ­ the audio adapter for ¼" (6. 35 mm) jack socket plug of the audio cable is too small ­ the in-flight adapter if you want to use the headphones with an in-flight entertainment system. 1 When the audio cable is connected to your audio source, you hear the sound from your audio source and the LED flashes blue. Detaching the audio cable If you want to use the PXC 360 BT as Bluetooth headphones only, you can detach the audio cable . Pull the 2. 5 mm jack plug of the audio cable the headphones. from the socket ´ of When detaching the audio cable, the Bluetooth function is not automatically switched on. Switch the Bluetooth function on again (see "Switching the Bluetooth function on/off" on page 18). 16 Using the PXC 360 BT Using the PXC 360 BT Adjusting the PXC 360 BT to the listening situation The headphones have a SRS WOW HD function, a NoiseGard function, a Bluetooth function and a TalkThrough function. Depending on the listening situation, you can switch these functions on or off. Switching the SRS WOW HD function on/off SRS WOW HD ensures enhanced sound quality and bass boost performance, thus allowing for a spectacular sound experience. To switch the SRS WOW HD sound enhancement on: Briefly press the SRS button ¿. The button is backlit in yellow and the SRS WOW HD function is switched on. To switch the SRS WOW HD sound enhancement off: Briefly press the SRS button ¿. The yellow backlighting goes off and the SRS WOW HD function is switched off. Switching the NoiseGard function on/off The NoiseGard button » is backlit, indicating the current setting. The backlighting goes off after a short while in order to conserve energy. Press any button on the headphones to display the current setting of the NoiseGard active noise compensation. [. . . ] Marketing · Stefanie Reichert One Enterprise Drive · Old Lyme · CT 06371 · USA Tel: +1 (860) 434 9190, ext. 144 Fax: +1 (860) 434 1759 declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. [. . . ]