User manual SENNHEISER RS 4200-2 II

[. . . ] RS 4200 II RS 4200-2 II RF wireless stereo stethoset headphone system Instruction manual A 4 3 2 1 B 7 6 5 8 9 0 A B D C C I A B E F C G H Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RS 4200-2 II product variant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operating controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] With most TVs, the headphone socket is located at the front or sides. Depending on the socket, you may have to use the adapter F. In order to prevent damage to hearing, newer TVs often have a function that mutes the TV sound as soon as headphones are connected. If another person wants to listen to the TV sound via the loudspeaker, deactivate the muting function via the TV menu setting. t oucket so dio e au phon d F E B a t out io cke ud so RC A Connecting the transmitter via the RCA sockets Connect the connection cable E to the adapter (RCA/ jack socket) G. Connect the red and white RCA connectors of the adapter G to the matching red and white RCA sockets on your sound source. With most TVs, the RCA sockets are located at the rear. R L G E 8 | RS 4200 II Putting the system into operation C H E Connecting the transmitter via the SCART socket If your sound source has a SCART socket, you can order the suitable SCART adapter from your Sennheiser dealer. Connect the connection cable E to the SCART adapter H. Plug in the SCART adapter H to the SCART socket on your TV. If your TV has several SCART sockets, select a SCART socket that is also an output (for details, see operating manual of your TV). D Using an external microphone If your sound source doesn't have a headphone or audio output, SCART or RCA socket, you can use your RS 4200 II together with an external microphone (optional accessory). Connect the microphone to the blue socket AUDIO 5 on the transmitter. Position the microphone in front of the loudspeaker of your sound source. You can change the sound by varying the position of the microphone in front of the loudspeaker. Connecting the transmitter to the mains 9 7 Connect the mains unit to the yellow socket (9 VDC) 7 on the transmitter. Plug the mains connector into a wall socket. When not using the transmitter for extended periods of time (e. g. when you are on holiday), pull out the mains connector from the wall socket. In this case, however, the receiver's rechargeable battery will not be recharged. RS 4200 II | 9 Putting the system into operation Inserting and removing the receiver's rechargeable battery The receiver is delivered with the battery inserted. Insert the battery into the compartment 2 as shown on the left. Make sure that the battery is inserted correctly. To remove the battery, use the finger catch projection to pull the battery out of the receiver. 2 Before using the rechargeable battery for the first time, charge it until the LED C lights up green (see "Storing and charging the receiver" on page 13). This can take a maximum of 3 hours. Inserting a spare rechargeable battery into the transmitter's charging compartment You can charge a spare battery (not included) in the charging compartment A at the side of the transmitter. This spare battery is not required for operating the RS 4200 II but offers extended listening time while the discharged first battery is being recharged. Insert the spare battery into the charging compartment A as shown on the left. [. . . ] Is the volume of the receiver sufficient?Is the rechargeable battery fully charged and inserted properly into the receiver?The sound is subject to interference Is the receiver still within the transmitter's range?Is interference being received from an external source in close proximity? [. . . ]