User manual SENNHEISER RS 4200

[. . . ] Instructions for use RS 4200 A B C A B C Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The RS 4200 stethoset receiver system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 RS 4200-2 product variant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If another person wants to listen to the TV sound via the loudspeaker, deactivate the muting function via the TV menu setting. B t ou o et di sock au CA R Connecting the transmitter via the RCA sockets Connect the connecting cable socket) . to the adapter (RCA/jack R L Connect the red and white RCA connectors of the adapter to the matching red and white RCA sockets on your sound source. Note: With most TVs, the RCA sockets are located at the rear. 7 C Connecting the transmitter via the SCART socket If your sound source has a SCART socket, you can order the suitable SCART adapter (see "Accessories" on page 16) from your Sennheiser dealer. Connect the connecting cable to the SCART adapter . Plug in the SCART adapter to the SCART socket on your TV. If your TV has several SCART sockets, select a SCART socket that is also an output (for details, see operating manual of your TV). D Using an external microphone If your sound source doesn't have a headphone or audio output, SCART or RCA socket, you can use your RS 4200 together with an external microphone (see "Accessories" on page 16). Connect the microphone to the blue socket AUDIO transmitter. on the Position the microphone in front of the loudspeaker of your sound source. You can change the sound by varying the position of the microphone in front of the loudspeaker. Connecting the transmitter to the mains Connect the mains unit to the yellow socket (9 VDC) transmitter. Plug the mains connector into a wall socket. Note: Pull the mains connector out of the wall socket when the transmitter will not be used for extended periods of time (e. g. In this case, however, the rechargeable battery will not be recharged. on the 8 Inserting and removing the receiver's rechargeable battery Insert the battery into the compartment as shown on the left. Make sure that the battery is inserted correctly. To remove the battery, use the finger catch projection to pull the battery out of the receiver. Note: The receiver is delivered with the battery inserted. Before you use the rechargeable battery for the first time, charge it until the LED lights up green (see "Storing and charging the receiver" on page 12). This can take a maximum of 3 hours. Inserting a spare rechargeable battery into the transmitter's charging compartment You can charge a spare battery (not included) in the charging compartment ¸ at the side of the transmitter. This spare battery is not required for operating the RS 4200 but offers extended listening time while the discharged first battery is being recharged. Insert the spare battery into the charging compartment ¸ as shown on the left. If the battery is inserted correctly, the LED ¹ lights up red: The rechargeable battery is being charged. green: The rechargeable battery is fully charged. ¹ ¸ 9 Using the system components Switching the transmitter on The transmitter automatically switches on when a sufficient audio signal is present at the headphone socket of your sound source. [. . . ] 3. 5 mm 3-pole jack/standard stereo L R GND 3. 5 mm 4-pole jack/microphone with additional power supply L R 8V GND 1k 16 Specifications System Modulation Carrier frequencies Range AF frequency response THD FM stereo 863. 3 / 864. 0 / 864. 7 MHz up to 100 m in the open 50 Hz­16 kHz <1% Transmitter Audio /microphone connection Charging time of rechargeable battery Power supply Weight Dimensions 3. 5 mm stereo jack socket approx. 3 hrs 9 VDC/300 mA via NT 4200 mains unit approx. SPL Power supply Operating time Weight Dimensions 125 dB (SPL) via BA 300 rechargeable battery (3. 7 V / 150 mAh) approx. 200 x 135 x 20 mm 17 Manufacturer Declarations Warranty regulations The guarantee period for this Sennheiser product is 24 months from the date of purchase. [. . . ]