User manual SENNHEISER SET 50 TV

[. . . ] Instructions for use Set 55 TV Set 50 TV A B C A B C Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The Set 50 TV/Set 55 TV stethoset receiver system . . . . . . . . . . . . . . . . . . . . . . 3 Set 50 TV: Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Set 55 TV product variant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Adjust the volume of the headphone socket on your sound source to a medium level. This improves the quality of cordless sound transmission. If necessary, check the menu setting of your TV. Note: With most TVs, the headphone socket is located at the front or sides. Depending on the socket, you may have to use the adapter ¹. In order to prevent damage to hearing, newer TVs often have a function that mutes the TV sound as soon as headphones are connected. If another person wants to listen to the TV sound via the loudspeaker, deactivate the muting function via the TV menu setting. 6 B t ou o et di sock au CA R Connecting the transmitter via the RCA sockets Connect the connecting cable ¸ to the adapter (RCA socket) . R L Connect the red and white RCA connectors of the adapter to the matching red and white RCA sockets on your sound source. Note: With most TVs, the RCA sockets are located at the rear. C Connecting the transmitter via the SCART socket If your sound source has a SCART socket, you can order the suitable SCART adapter (see "Accessories" on page 14) from your Sennheiser dealer. Connect the connecting cable ¸ to the SCART adapter . Plug in the SCART adapter to the SCART socket on your TV. If your TV has several SCART sockets, select a SCART socket that is also an output (for details, see operating manual of your TV). D Using an external microphone If your sound source doesn't have a headphone or audio output, SCART or RCA socket, you can use your system together with an external microphone (see "Accessories" on page 14). Connect the microphone to the blue socket AUDIO INPUT on the transmitter. Position the microphone in front of the loudspeaker of your sound source. You can change the sound by varying the position of the microphone in front of the loudspeaker. 7 Connecting the transmitter to the mains Connect the mains unit to the yellow socket (12 VDC) the transmitter. on Plug the mains connector into a wall socket. If the receiver is stored in the transmitter's charging compartment , the LED µ goes off. Note: Pull the mains connector out of the wall socket when the transmitter will not be used for extended periods of time (e. g. In this case, however, the rechargeable battery will not be recharged. Inserting and removing the receiver's rechargeable battery Insert the battery into the compartment as shown on the left. Make sure that the battery is inserted correctly. To remove the battery, use the finger catch projection to pull the battery out of the receiver. · Note: The receiver is delivered with the battery inserted. Charge the battery for at least 3 hours before you use it for the first time (see "Storing and charging the receiver" on page 10). Inserting a spare rechargeable battery into the transmitter's charging compartment º You can charge a spare battery (not included in the delivery of the Set 50 TV) in the charging compartment at the side of the transmitter. This spare battery is not required for operating the Set 50 TV/Set 55 TV but offers extended listening time while the discharged first battery is being recharged. [. . . ] 3. 5 mm 3-pole jack/standard stereo L R GND 3. 5 mm 4-pole jack/microphone with additional power supply 14 L R 8V GND 1k Specifications System Modulation Carrier frequencies Range AF frequency response THD FM mono 2. 3 MHz approx 12 m within a room 50 Hz­12 kHz <1% Transmitter Audio /microphone connection Charging time of rechargeable battery Power supply Weight Dimensions 3. 5 mm stereo jack socket approx. 14 hours 12 VDC/200 mA via NT 5 mains unit approx. SPL Power supply Operating time Weight Dimensions 120 dB (SPL) via BA 151 NiMH rechargeable battery (2. 4 V / 80 mAh) approx. 200 x 150 x 20 mm 15 Manufacturer Declarations Warranty regulations The guarantee period for this Sennheiser product is 24 months from the date of purchase. [. . . ]