Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SENNHEISER SI 10-92. We hope that this SENNHEISER SI 10-92 user guide will be useful to you.
Lastmanuals help download the user guide SENNHEISER SI 10-92.
Detailed instructions for use are in the User's Guide.
[. . . ] If In certain cases only two radiators are required each of the radiators should be connected to 0 n e output. operation Insert malns plug @ into 220 volt outlet. Switch on unit by depressing power switch @. [. . . ] Switch on unit by depressing power switch @. The yellow LED @ indicates the ready - mode of the transmitter. The sWltch @ is put in position "Dyn" when dynamic mlCiophones are used and in position "Cond" for 12 V A~B powered condenser microphones. The diode T 12 Cf) lights up only when a condenser microphone ISconnected. Simultaneous operation of both inputs is not provlded since the MlC-input is designed for prionty operation. This is obtained when at volume peaks all green diodes @ light up and a nominal deviation of :f:: 40 kHz is reached. Further increase of input level is indicated by the first red diode @ meaning that nominal deviation is exceeded. Choice of microphones It IS recommended to use dynamic microphones with a standard sensitivity of 0. 2 mV/flbar if the mlcrophone is spoken into from a close distance. the switch @ must be in the position "Dyn. " The indicator diode for the A-B feed "T 12" must not light. MKH 415 T is recommended if more distant sound sources have to be transmitted (e. The powering switch @ ISt then to be put in the position "Cond". The indicator diode "T 12" Cf)must light when a condenser microphone i s co n n e cted The choise of a suitable mlcrophone helps to avoid modulation problems when operating the transmitter. [. . . ] The powering switch @ ISt then to be put in the position "Cond". The indicator diode "T 12" Cf)must light when a condenser microphone i s co n n e cted The choise of a suitable mlcrophone helps to avoid modulation problems when operating the transmitter. Transmitter LED-chain green, indicators for normal modulation Power switch LED yellow, power indicator Voltage conversion for 110 V-lines The unit is delivered ready for use on 220 V power lines. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SENNHEISER SI 10-92
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SENNHEISER SI 10-92 will begin.
