User manual SENNHEISER SI 30-3000 SINGLE PRODUCT SHEET
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SENNHEISER SI 30-3000 SINGLE. We hope that this SENNHEISER SI 30-3000 SINGLE user guide will be useful to you.
Lastmanuals help download the user guide SENNHEISER SI 30-3000 SINGLE.
Manual abstract: user guide SENNHEISER SI 30-3000 SINGLEPRODUCT SHEET
Detailed instructions for use are in the User's Guide.
[. . . ] The SI 30 trans4. 707" (119. 56 mm) Power Supply mitter and SZI 30 emitter are the primary components of the system. These are (2 Pin Texas Socket) powered by the NT20-4-120 AC power adapter1. 000" KKY20-015 octopus power and (25. 40 For cable, which connects up to four SI30 and SZI30. mm) easy installation, the SI30 RF Output and SZI30 may be(3. 5 mm MONO Jack) wall or ceiling mounted with the IZK20 mounting clamp and Internal IR Transmission Diodes IZM20 mounting hardware, in combination with the WM1 wall/ceiling mount. [. . . ] The AF signal-to-noise ratio shall be greater than/equal to 60 dB(a) rms. The maximum coverage area shall be approx. The operating voltage shall be 24-27 DC via 2-pin Texas socket. The current consumption shall be approx. 4. 64" x 0. 98" x 3. 54" and weigh approx. The SZI30 shall be an infrared emitter with a carrier frequency band that extends to 6 MHz RF input and RF output via 3. 5 mm mono socket. The unit shall offer excellent reliability due to 10 independent diodes. The unit shall offer a 24-27 V DC via 2-pin Texas socket. The power supply NT20-4-120 shall provide power for up to four SI30/SZI30, and shall have an output voltage of approx. The power distribution cable KKY20-015 shall connect up to four SI30/SZI30 to an NT20-4-120 power supply, and shall have an approx. length of 0. 15 m, with four Texas plugs and one Texas socket. The RF connection cable KR20-015 shall provide connection, via two 3. 5mm jack plugs, of an SI30 to an SZI30 or for daisy-chaining two SZI30's, with a length of 0. 15 m. The SI30 and SZI30 shall be wall or ceiling mountable via the IZK20 mounting clamp with 3/8" internal thread. The IZM20 mounting kit shall contain a 3/8" and 5/8" internal thread for mounting two to four SI30 and SZI30. Every modulator/radiator must utilize one IZK20 mounting clamp. The WM1 shall provide wall or ceiling mounting via a mounting clamp with 5/8" external male thread, with a mounting plate diameter of 1 5/8". [. . . ] The Sennheiser Service Department will be the sole authority to determine the validity of all warranty issues. This Limited Product Warranty is Sennheiser Electronic Corporation's only warranty, and the customer's only remedy concerning Sennheiser products. All other representations and warranties, express or implied, written or oral, including, but not limited to, any warranties of merchantability, fitness for a particular purpose, or non-infringement, are expressly excluded. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SENNHEISER SI 30-3000 SINGLE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SENNHEISER SI 30-3000 SINGLE will begin.
