User manual SENNHEISER SK 5212-II

[. . . ] Manual de instruções SK 5212-II Instruction manual Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The SK 5212-II bodypack transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Displaying the menu settings in display mode In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see "Overview of the menus" on page 19). After a few seconds, the display returns to the standard display. SET DOWN UP ¾ Slide the multi-function switch ¾ to the position (UP) or (DOWN) to display the menu settings. If you slide the multi-function switch repeatedly to the same position, all menu settings are displayed one after the other. Changing to the selection mode To change from display mode to selection mode, you have to deactivate the lock mode. Deactivate the lock mode as described in the chapter "Deactivating the autolock function temporarily" on page 13. You can now select the menu whose settings you want to adjust. Press the multi-function switch ¾ (switch position SET). You change to the menu that was displayed in display mode. Selecting a menu SET DOWN UP Slide the multi-function switch ¾ to the position (DOWN). (UP) or ¾ Press the multi-function switch ¾ (switch position SET). The name of the selected menu starts flashing. Changing to the setting mode of a selected menu SET DOWN UP ¾ Press the multi-function switch ¾ (switch position SET). You change to the setting mode of the selected menu where you can adjust settings. The current setting that can be adjusted flashes on the LC display panel ¿. 17 Using operating menu Adjusting a setting Use the multi-function switch ¾ to adjust the setting of the selected menu. By briefly sliding the multi-function switch ¾ to the position (UP) or (DOWN), the display jumps either forwards or backwards to the next setting. In the "ATTEN", "CHAN", "TUNE" and "NAME" menu and when slid to the position (UP) or (DOWN), the multi-function switch ¾ features a "fast search" function, i. e. In the "TUNE" menu, the cycling of the display is continuously accelerated. The "fast search" function allows you to get fast and easily to your desired setting. Storing a setting SET DOWN UP ¾ Press the multi-function switch ¾ (switch position SET) to permanently store a setting. "STORED" appears on the display panel, indicating that the setting has been stored. The display then returns to the last edited menu. With most menus, new settings become effective immediately without having to be stored. An exception are the "TUNE" and "CHAN" menus. With these menus, new settings only become effective after they have been stored ("STORED" appears on the LC display panel ¿, indicating that the setting has been stored). Exiting the operating menu Select the "EXIT" menu to exit the operating menu and to return to the standard display. When in the operating menu, pressing the ON/OFF button µ will cancel your entry (ESC function) and return you to the standard display with the last stored settings. µ 18 Using operating menu Overview of the menus Deactivate the lock mode before adjusting the settings (see "Deactivating the autolock function temporarily" on page 13). [. . . ] 90 % shock test according to IEC 68 or EN 60068, T2-27 EMC Radio Safety EN 301489-1/-9 EN 300422-1/-2 EN 60065 EN 62311 (SAR) Approved by Canada Industry Canada RSS-123 IC: 2099A-SK5212A2 limited to 806 MHz FCC-Part 74 FCC ID: DMOSK5212A2 limited to 698 MHz USA 30 Specifications Pin assignment of microphone socket 3 1 2 AF socket Pin 1: +5. 2 V for external special microphones Pin 2: AF and 5. 2 V AB-powering; 8. 2 k internal resistance, optimized for Sennheiser pre-polarized condenser microphones. Pin 3 and thread: ground Audio sensitivity The transmitter's audio sensitivity can be adjusted over a range of 70 dB (+40 dB to ­30 dB) in steps of 1 dB. The diagram below shows the sensitivity range of the SK 5212-II in comparison to the earlier product generations SK 50 and SK 5012. SK 50 42 36 30 24 18 12 6 SK 5012 SK 5212-II 40 24 16 8 1 8 0. . . 42 dB 16 ­16. . . +24 dB 30 ­30. . . +40 dB Switch position 31 Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. [. . . ]