User manual SENNHEISER SKM 1032

[. . . ] We want you to enjoy your new radiomicrophone quickly and to the full. SKM 1030 and SKM 1032 are radiomicrofphones for use with wireless transmission systems. [. . . ] Please take care that these contacts are clean, i. Take care that the transmitter frequency and the received frequency selected at the receiver do correspond. 2 mm) or the end of the wire antenna which is shaped like a small blade is suitable tools for the selection. How to switch on / how to select sensitivity The ON/OFF-switch which is used more frequently is positioned slightly above the selector switch. After having switched on the transmitter you must wait approx. 2 seconds as the transmitter requires this time for adjusting to the chosen frequency. Close-miking can thereby not result in overmodulation. With switch º you can mute the microphone of the hand-held transmitter without switching off the transmitter itself. This avoids hissing noise in the receiver. the "ON" and "OFF" positions are clearly marked on the switch. Switch º can be locked in the ON position to avoid accidental switching (note the position of the screw head): In exceptional cases the transmitter can also be operated without the antenna. Parts of the electronic circuit and the battery then act as an antenna. [. . . ] Frequency synthesizing Number of channels /channel grid Transmitter output power SKM 1032-0 Transmitter output power SKM 1032-UHF Carrier frequencies SKM 1032-0 9 MHz or 6 frequencies in the range from 30-45 MHz Carrier frequencies SKM 1032 VHF 6 frequencies in the range from 138-145 MHz or from 170-260 MHz Modulation FM, wideband Switching band width SKM 1032-0 SKM 1032-0: 3 MHz SKM 1032-VHF: 12 MHz Switching band width SKM 1032-VHF approx. To effect correct application of the requirements stated in the EEC Directives, the following standards were consulted: déclarons que ces appareils sont conformes aux prescriptions fondamentales dans la Directive de la CEE 89/336/CEE or la Directive R&TTE 1999/5/EC. [. . . ]