User manual SENNHEISER SKM 100-865 G3

[. . . ] SKM 100 Instruction manual Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The SKM 100 G3 radio microphone family . . . . . . . . . . . . . . . . . . . . . . . . . 3 The frequency bank system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Areas of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The last selected menu item is displayed. Selecting a menu item Move the multi-function switch to change to the "Sensitivity" menu item. The current setting of the selected menu item is displayed: Menu Sensitivity ­12 dB Changing and storing settings SET Menu Sensitivity ­12 dB Call up "Sensitivity" Sensitivity ­12 dB Select the desired setting Sensitivity ­36 dB Store the setting SET "Stored" Press the multi-function switch to call up the menu item. Move the multi-function switch to adjust the input sensitivity. Press the multi-function switch to store the setting. Canceling an entry ON/OFF Press the ON/OFF button to cancel the entry. The current standard display appears on the display panel. To subsequently return to the last edited menu item: Press the multi-function switch repeatedly until the last edited menu item appears. 18 Using the operating menu Exiting a menu item Change to the "Exit" menu item. Menu Exit Confirm your selection. You return to the next higher menu level. To directly return to the current standard display: ON/OFF Press the ON/OFF button. 19 Adjusting settings via the operating menu Adjusting settings via the operating menu Make use of the possibility to adjust settings via the operating menu of your receiver and to transfer these settings to the radio microphone. For more information, refer to the instruction manual of the receiver. The relevant information is marked with the sync icon. The main menu "Menu" Adjusting the input sensitivity ­ "Sensitivity" Menu Sensitivity ­12 dB Call up "Sensitivity" Sensitivity ­12 dB Select the desired setting Sensitivity ­36 dB Store the setting "Stored" Adjustment range: 0 to -48 dB, adjustable in steps of 6 dB The audio level display "AF" always indicates the audio level, even if the radio microphone is muted, e. g. allowing you to check the adjusted sensitivity before live operation. B. Ch: 20. 12 533. 875 MHz AF P MUTE Input sensitivity is adjusted. . . too high Close talking distances, speakers with loud voices or loud music passages cause overmodulation in the transmission link. The audio level display "AF" shows full deflection for the duration of the overmodulation. The audio level display "AF" shows full deflection only during the loudest passages. The transmission link is undermodulated. This results in a signal with high background noise. . . . too low 20 Adjusting settings via the operating menu The following figures are a guide to the best settings: Transmission situation Loud music/vocals Presentations Interviews Sensitivity setting -48 to -18 dB -18 to -12 dB -12 to 0 dB Selecting the frequency bank and the channel manually ­ "Frequency Preset" Menu Frequency Preset B. Ch: 1. 1 Call up "Frequency Preset" Frequency Preset B. Ch: 1. 1 516. 200 MHz Select the frequency bank and confirm Frequency B. Ch: 20. 1 533. 875 MHz Select the channel; store the setting "Stored" When you are in the "Frequency Preset" menu item, the RF signal is deactivated. Overview of the frequency banks and channels: Frequency bank "1" to "20" Channels Type up to 12 per System bank: frequency frequencies are factorybank preset up to 12 User bank: frequencies are freely selectable "U" When setting up multi-channel systems, please observe the following: Only the factory-preset frequencies within one frequency bank are intermodulation-free (see page 25). [. . . ] 450 g Sennheiser HDX 80­18, 000 Hz 110 dBA 0. 9% 48 dB, adjustable in 6-dB steps 42 MHz ±24 kHz/±48 kHz ±15 ppm typ. 30 mW can be switched off Transmission frequencies 30 Specifications In compliance with Europe EMC Radio Safety EN 301489-1/-9 EN 300422-1/-2 EN 60065 EN 62311 (SAR) Approved by Canada Industry Canada RSS 123 IC: 2099A-G3SKMEM limited to 806 MHz FCC-Part 74 FCC-ID: DMO G3SKMEM limited to 698 MHz USA Microphone heads MMD 835-1 Microphone type Sensitivity Pick-up pattern Max. SPL dynamic 2. 1 mV/Pa cardioid 154 dB SPL MMD 845-1 dynamic 1. 6 mV/Pa supercardioid 154 dB SPL MME 865-1 condenser 1. 6 mV/Pa supercardioid 152 dB SPL Polar diagrams and frequency response curves of the microphone heads Polar diagram MMD 835-1 30° 0° 0 5 10 60° 15 20 25 90° dB 90° 90° Polar diagram MMD 845-1 30° 0° 0 5 10 30° 30° 60° 60° 15 20 25 dB 60° 90° 120° 120° 120° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 180° 150° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 150° 180° 150° 2000 Hz 4000 Hz 8000 Hz 16000 Hz Polar diagram MME 865-1 30° 0° 0 5 10 60° 15 20 25 90° dB 90° 60° 30° 120° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 180° 150° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 31 Specifications Frequency response curve MMD 835-1 dBV -30 -40 -50 -60 -70 -80 50 100 200 500 1. 000 1k 2k 5k 10. 000 10k 20k Hz Frequency response curve MMD 845-1 dBV -30 -40 -50 -60 -70 -80 50 100 200 500 1. 000 1k 2k 5k 10. 000 10k 20k Hz Frequency response curve MME 865-1 dBV -30 -40 -50 -60 -70 -80 50 100 0° 200 90° 500 1. 000 1k 2k 5k 10. 000 10k 20k Hz 32 Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. [. . . ]