Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SENNHEISER WICOS D. We hope that this SENNHEISER WICOS D user guide will be useful to you.
Lastmanuals help download the user guide SENNHEISER WICOS D.
You may also download the following manuals related to this product:
SENNHEISER WICOS D PRODUCT SHEET (361 ko)
Manual abstract: user guide SENNHEISER WICOS D
Detailed instructions for use are in the User's Guide.
[. . . ] Wireless Conference System
WiCOS
Instruction manual
Contents
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 WiCOS the wireless conference system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Areas of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 The technology used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the "Subnet Mask" field, type the desired subnet mask. Make sure that this IP address is not used in your network. Note down the IP address so that you can call up the web server again. Switch the access point off and on again (see page 29). You can now access the web server via the new IP address. In the address box of the browser, type the new IP address of the access point.
50
Configuring the conference system
Press the Enter key. The web server appears in the browser window. If you have forgotten the new IP address, you can reset the access point to the factory default settings in order to be able to access the web server (see page 44). Attention: If the access point is reset, any custom settings will be lost!If you want to integrate the access point into a managed network in which only selected devices are allowed to be integrated, you have to assign your router or switch the MAC address of the access point. You can find this MAC address on the "Summary" overview screen (see page 49). Setting the country-specific limit values "Country selection" To set the conference system to the country-specific limit values for radio systems: CAUTION!Risk of violation of legal requirements!If you are using radio frequencies and transmission powers that cannot be used license-free in your country, there is a risk of violation of legal requirements. Use only radio frequencies and transmission powers that are approved and legal in your country. From the "Country selection" drop-down list, select the correct country is which the conference system is to be used. In the main navigation, click "Setup" > "Country selection". The "Country selection" overview screen appears.
From the "Country selection" drop-down list, select the country in which the conference system is to be used.
51
Configuring the conference system
Click "Save settings". The selected country is displayed in the "Selected Country Region" field. The conference system will only use frequencies and transmission powers that are approved and legal in the selected country/region. The country-specific radio settings for the United States and Canada, "US/Canada", are the most restricted radio settings in the conference system. These settings are used as the factory default settings. [. . . ] The devices can be operated license-free in most countries of the European Union.
Approved by
Canada: Industry Canada RSS 210 IC: 2099A-SDCW9000AP IC: 2099A-SDCW9000DU 47 CFR Part 15 FCC ID: DMOSDCW9000AP FCC ID: DMOSDCW9000DU
USA:
Power supplies
WiCOS NT-BA Input voltage Input current (max. ) Output voltage Output power Operating temperature Storage temperature 100 - 240 V / 50 - 60 Hz 700 mA 15 V 2A 40 °C to + 70 °C WiCOS NT-AP 100 - 240 V / 50 - 60 Hz 400 mA 24 V 0. 625 A
0 °C to + 40 °C at maximum load
Certifications (WiCOS NT-BA and WiCOS NT-AP)
In compliance with
Europe: USA: Canada: EMC EN 55022, EN 55024 Safety EN 60950 47CFR Part 15 ICES 0003
Certified by
Europe: USA/Canada: ENEC, VDE cULus
85
Manufacturer Declarations
Manufacturer Declarations
Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www. sennheiser. com or contact your Sennheiser partner. CE Declaration of Conformity
0682
These devices are in compliance with the essential requirements and other relevant provisions of Directives 2004/108/EC, 2006/95/EC and 1999/ 05/EC. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SENNHEISER WICOS D
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SENNHEISER WICOS D will begin.