User manual SEVERIN AS 3914

[. . . ] For safety reasons, always bring the stop plate to its rest (zero) position after use, so that it is flush with the blade. Operated with the sliding tray and endpiece holder safely fitted and in operating position, unless the size or shape of the food to be cut makes this impossible. Do not use any accessories or parts other than those that accompany this appliance or those recommended by the manufacturer. This food slicer is not suitable for cutting frozen food. [. . . ] The slicer should not be operated continuously for more than 10 minutes. Switch it off afterwards and allow the motor to cool down before switching on again Positioning the slicer - Position the slicer on a flat, stable surface. - Before the appliance is connected to the mains , ensure that the On/Off switch is in the Off-position. Slicing Follow the above instructions when operating the slicer. - Use the thickness selection knob to adjust the desired thickness of the slices. - Place the food to be sliced onto the sliding tray and press it against the stop plate. - Fit the safety holder, with the studded side facing the blade, onto the sliding tray. - Switch the appliance on and move the sliding tray towards the rotating blade. At the same time, lightly press the endpiece holder with the food towards the blade. - The end-piece holder ensures safe handling of the food while slicing. - When removing the sliced food, keep fingers and hands well away from the Always switch the slicer off after use. For safety reasons, always bring the stop plate back to its rest position after use so that it is flush with the blade. Practical hints - When cutting a loaf of bread where the crust is thicker or harder on one side, it should be placed against the blade in such a way that the firm side faces the blade. - When cutting cheese or very thin slices of other foods, use a slightly damp cloth to moisten the blade before cutting. This will make the slicing process easier. - When cutting ham , ensure that the fatty side is facing upwards. Cleaning and care Clean the slicer before using it for the first time, or after a long period of non-use. From collecting in the slicer, clean it thoroughly after use. Always remove the plug from the wall socket before cleaning the slicer or detaching any accessories. Wait until the motor has come to a complete standstill. [. . . ] Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. [. . . ]