User manual SEVERIN AS 3947

[. . . ] For safety reasons, always bring the stop plate to its rest (zero) position after use, so that it is flush with the blade. Caution: the appliance should be operated only with the sliding tray and end-piece holder safely fitted and in operating position, unless the size or shape of the food to be cut makes it unavoidable. Do not use any accessories or parts other than those that accompany this appliance or those recommended by the manufacturer. This food slicer is not suitable for cutting frozen food. [. . . ] Ham slicer The ham slicer is used for slicing ham, cheese etc. to change the blade , proceed as described in section `Detaching and cleaning the blade'. Release button To start operating the appliance, first press the release button, then press and hold the operating push-button. The appliance only runs while the push-button is kept depressed. releasing the push-button causes the appliance to switch off. Slicing Follow the above instructions when operating the slicer. - Adjust the desired thickness of the slices. - Fit the collection tray underneath the appliance in such a way that the tray sits safely in both tracks. - Use your right hand to place the food to be sliced onto the sliding tray and press it against the stop plate. - Fit the safety holder, with the studded side facing the blade, onto the sliding tray. - Use your left hand to hold down the release button while simultaneously pressing the operating push-button, and move the sliding tray towards the rotating blade. At the same time, lightly press the end-piece holder with the food towards the blade. - The end-piece holder ensures safe handling of the food while slicing. - Once slicing is finished, release the operating push-button in order to switch the appliance off. For safety reasons, always bring the stop plate back to its rest position after use so that it is flush with the blade. Practical hints - When cutting a loaf of bread where the crust is thicker or harder on one side, it should be placed against the blade in such a way that the firm side is facing the blade. - When cutting cheese or very thin slices of other foods, use a slightly damp cloth to moisten the blade before cutting. This will make the slicing process easier. - When cutting ham , ensure that the fatty side is facing upwards. Cleaning and care Clean the slicer before using it for the first time, or after a long period of non-use. General To prevent perishable food particles from collecting in the slicer, clean it thoroughly after use. Always remove the plug from the wall socket before cleaning the slicer or detaching any accessories. [. . . ] This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. This guarantee does not affect your statutory rights, nor any legal rights you may have as a consumer under applicable national legislation governing the purchase of goods. The stainless-steel blade can be cleaned with a slightly damp, lint-free cloth. [. . . ]