User manual SEVERIN AS 3950

[. . . ] Caution: keep any packaging materials well away from children, as they are a potential source of danger e. Do not allow the slicer to come into contact with open flames or any hot surface such as hotplates. For safety reasons, always bring the stop plate back to its rest (zero) position after use, so that it is flush with the blade. We strongly recommend that the appliance is only used with the sliding tray and end-piece holder properly installed and in position. [. . . ] Adjusting the thickness The thickness of the slices is infinitely adjustable by means of the selection knob. Always bring the stop plate back to its rest (zero) position after use. Safety switch To activate the motor, first press and hold the release button, then press the push switch, which will lock in the operating position. To stop the motor, press the push switch again. Slicing Following the above safety instructions, the slicer can now be operated. € Adjust the desired thickness of the slices. € Use the right hand to place the food to be sliced on to the sliding tray and to press it against the stop plate. € Fit the end piece holder, with the studded side facing the blade, on to the tray. € Use the left hand to press the release button and, almost simultaneously, the push switch, and then move the sliding tray against the rotating blade. At the same time, press the end piece holder containing the food lightly against the blade. € The end piece holder ensures the food will be held safely while slicing takes place. For safety reasons, always bring the stop plate back to its rest (zero) position after use so that it is flush with the blade. Practical hints – When cutting a loaf of bread where the crust is thicker or harder on the top, it should be placed against the blade in such a way that the firm part of the crust faces the cutting edge. € When cutting cheese, or when cutting very thin slices of other foods, use a slightly moist cloth to wipe the blade first. This will make the slicing process easier. – When cutting ham , ensure that the fatty side is facing upwards. General cleaning and care General Always remove the plug from the wall socket before detaching any accessories, and before cleaning the appliance. After switching off, always wait until the blade has come to a complete standstill. Bring the stop plate back to its rest (zero) position, so that the blade does not protrude. To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in water. Do not use abrasives or harsh cleaning solutions for cleaning. If necessary, the housing may be wiped with a slightly damp, lint-free cloth. [. . . ] Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. – When cutting ham , ensure that the fatty side is facing upwards. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. [. . . ]