User manual SEVERIN BA 3237

[. . . ] The appliance operates at very high temperatures. Do not touch any part of the appliance except the handle. Burns can occur from touching the hot parts of the housing or the soleplate and from hot water or steam. When operating the steam iron, hold only by the handle. [. . . ] Remove the plug from the wall socket before filling the reservoir. - This steam iron is to a large extent resistant to hard water (up to 15º dH). Although normal tap water may be used, it is advisable to use distilled, demineralised or decalcified water. Should you be unsure about the hardness of the water in your area, please enquire of the relevant local authority department. - This steam iron is to a large extent resistant to hard water (up to 15º dH). This will result in the removal of possible dust particles from the soleplate and subsequently lessen the smell typically encountered when first switching on. The temperature level for steam ironing is indicated on the temperature control knob. - After filling the reservoir with water, place the steam iron upright on its base stand and insert the plug into the wall socket. - Set the temperature control knob to the required ironing temperature as indicated by the ironing symbols. - During the heating-up process the indicator lamp will be on. The lamp will go out once the required ironing temperature is reached. — Before ironing any fabrics, the soleplate should be cleaned by passing it over an old, clean cotton cloth, while using the steam jet function; this helps to flush out any dirt residues or lint particles trapped inside the openings in the soleplate. — The steam output can be adjusted with the steam control button or completely switched off for dry ironing. — For dry ironing, the water reservoir may be empty. Should there be water left in the reservoir, the steam jet function may also be used when dry-ironing at higher temperature settings. — Place the steam iron upright on its base stand after use and remove the plug from the wall socket. ironing ● Steam ironing requires high temperatures. The automatic switch-off is indicated by a beep signal; in addition, the red indicator light flashes. As soon as the appliance is moved, it will switch on again. Horizontal position: With the iron standing on its sole plate, it will switch off after approx 30 seconds of inactivity. Vertical position: When upright on its base stand, the iron will switch off after approx. Steam Jet When the steam jet button is depressed, an additional hot steam jet is emitted from the soleplate. [. . . ] Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. - Hold the iron horizontally over a sink. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. [. . . ]