User manual SEVERIN BA 3239

[. . . ] This product complies with the directives which are binding for the CE-labelling. Base stand (rear) Important safety instructions Do not leave the iron unattended while connected or on an ironing board. [. . . ] If repairs are needed, please send the appliance to one of our customer service departments. The addresses can be found in the appendix to this manual. No responsibility is accepted if damage results from improper use, or if the instructions are not complied with. If the iron is passed to another person, this instruction manual must accompany it. Operation Start up Place the iron upright on its base stand, insert the plug into the wall socket and set the infinitely adjustable temperature control knob to its · Leave the iron connected for a short while after the indicator lamp has gone out. This will lessen the smell typically encountered when first switching the iron on. Afterwards, clean the iron according to the instructions given in the paragraph "General Care and Cleaning". Preparation Before ironing starts, we recommend the following: - Laundry to be ironed should be sorted according to the fabric ironing temperature indicated on the label. - Information on the appropriate ironing temperature can usually be found on the garment's characterisation label. In addition, please note the following: - When ironing highly sensitive fabrics, or if you are not sure about the fabrics, you may carefully test-iron at a non-visible point, eg inside of seam. - If the laundry is being dried in a dryer before ironing, the temperature should be adjusted to "iron dry". For storage, and also when ironing is interrupted, the iron must be placed upright on its base stand (resting position). [. . . ] This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. [. . . ]