User manual SEVERIN BA 3241

[. . . ] Do not touch any part of the appliance except the handle. Burns can occur from touching the hot parts of the housing or the soleplate and from hot water or steam. When operating the steam iron, hold it only by the handle. Do not allow steam to escape in the direction of anyone nearby. [. . . ] Filling with water Fill the water reservoir before using the steam function or the spray nozzle. Remove the plug from the wall socket before filling the reservoir. – This iron is to a large extent resistant to hard water (up to 15º dH). Although normal tap water may be used, it is better to use distilled, demineralised or decalcified water. Should you be unsure 10 about the hardness of the water in your area, please enquire of the relevant local authority department. ensure that the steam control button is closed. It should be opened only once the temperature level required for steam ironing [as indicated on the temperature control knob] has been reached. €“ Open the cover of the water filling hole. €“ Fill the water reservoir using the measuring cup provided to the indicated Max level only. €“ Close the filling hole, ensure that the cover is heard clicking into place. Anti-drip function If the temperature of the soleplate is not sufficient to produce steam, the water supply is cut off automatically to prevent dripping. Horizontal position: When resting on its sole plate, the iron will switch off after approx 30 seconds of inactivity. Vertical position: When standing upright on its base, it will switch off after approx. Steam jet When the steam jet button is depressed, an additional hot steam jet is emitted from the soleplate. This function can be very useful when the normal amount of steam emitted is not sufficient to remove stubborn creases, or when ironing difficult or thick fabrics. For optimum steam output, wait about 4 seconds before using this function again. The steam jet function may also be used with the iron held vertically, to remove creases or wrinkles from fabrics. Note: For a more powerful steam jet, set the steam control to ‘dry ironing’. Using the dual spray nozzle The laundry can be dampened by pressing the spray button. This will help to smooth out difficult areas, and may be used at any temperature during dry or steam ironing. General care and cleaning Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely. To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in water. [. . . ] €“ Allow the sole plate to cool down before cleaning it with a damp, lint-free cloth. Storage Turn off the iron, remove the plug from the wall socket and let the unit cool down completely. €“ Pour any remaining water out of the reservoir through the water filling hole. €“ Once the iron has completely cooled down, the power cord can be wound around the rear part of the appliance. [. . . ]