User manual SEVERIN BA 3277

[. . . ] When operating the steam iron, hold only by the handle. Do not allow steam to escape in the direction of anyone nearby. The iron must be used and stored on a stable and durable surface only. With the iron placed on its base stand, ensure that this too is on a stable and durable surface. [. . . ] Although normal tap water may be used, it is advisable to use distilled, demineralised or decalcified water. Should you be unsure about the hardness of the water in your area, please enquire of the relevant local authority department. - Fill the empty water reservoir using the measuring cup provided. Fill the reservoir to the indicated “Max” level only. General information about ironing Always check first whether a label with ironing instructions is attached to the article to be ironed. - The meaning of the ironing symbols is as follows: • synthetics 6 ● ● ● (low temperature) silk and wool (medium temperature) ••• cotton and linen (high temperature) These markings can also be found on the temperature control knob of the steam iron in form of dot symbols. Laundry to be ironed should be sorted according to the fabric ironing temperature. Follow the ironing symbols and start with the lowest temperature. When ironing highly sensitive fabrics, or if you are not sure about the fabrics, you may carefully test-iron at a non-visible point, e. If the laundry is being dried in a dryer before ironing, the temperature should be adjusted to “iron dry”. This will result in the removal of possible dust particles from the soleplate and subsequently lessen the smell typically encountered when first switching on. The temperature level for steam ironing is indicated on the temperature control knob. - After filling the reservoir with water, place the steam iron upright on its base stand and insert the plug into the wall socket. - Set the temperature control knob to the required ironing temperature as indicated by the ironing symbols. - During the heating-up process the indicator lamp will be on. The lamp will go out once the required ironing temperature is reached. — Before ironing any fabrics, the soleplate should be cleaned by passing it over an old, clean cotton cloth, while using the steam jet function; this helps to flush out any dirt residues or lint particles trapped inside the openings in the soleplate. — The steam output can be continuously adjusted with the steam control button or completely switched off for dry ironing. — For dry ironing, the water reservoir may be empty. Should there be water left in the reservoir, the steam jet function may also be used when dry-ironing at higher temperature settings. — Place the steam iron upright on its base stand after use and remove the plug from the wall socket. Steam Jet When the steam jet button is depressed, an additional hot steam jet is emitted from the soleplate. [. . . ] Guarantee This product is guaranteed against defects in materials and workmanship for a period of 7 disconnected from the power supply and has cooled down completely. — To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in water. - If necessary, the unit may be wiped with a dry fuzz-free cloth. - Starch, fat and other deposits on the soleplate may be removed with a woollen cloth soaked in a vinegar-water solution. [. . . ]