User manual SEVERIN BK 3177

[. . . ] In the event of such damage being found, the appliance must no longer be used. Do not allow the bottle warmer to operate without supervision. caution: The warming container reaches high temperatures during operation. The appliance is to be used only for warming up bottles or glass jars containing baby food. [. . . ] The heating time largely depends on the quantity of the food, as well as its initial temperature. the following table provides a general guide to heating times: Initial temperature 7 °C Quantity 100 ml 200 ml 300 ml 20 °C 300 ml. Baby bottle – Pull up the lift-out holder and put the filled bottle into the holder, before lowering it carefully back into the container. € Fill the warming container with water up to the level mark. Baby-food glass jar – Remove the lid from the glass jar containing the food. € Pull up the lift-out holder and put the glass jar into the holder; then lower it carefully back into the container. Fill the warming container with sufficient water to reach a level of about 1. However, do not exceed the max level mark. + – Set the temperature control to position 3. € Insert the plug into a wall socket; the heating process begins and the indicator light will come on during the warm-up and keep-warm stages. € To ensure an even temperature distribution throughout the baby food during the warming process, the bottle or jar should be shaken or stirred at regular intervals. – Check the temperature regularly. Before it is fed to the child, the temperature of the food must be carefully checked, e. € Once the pre-set temperature level is reached, use the lift-out holder to remove the bottle or glass jar from the container. € To keep the baby food warm, set the temperature control to position 1 or 2. To prevent any build-up of bacteria or loss of vitamins, baby food should not be kept warm for too long. € Set the temperature control to its  9 Temperature Minutes Minutes control 3 3 3 9 13 15 7 9 11 125 g 200 g 250 g 3 3 3 10 12 15 9 10 11 7 °C = temperature from the fridge 20 °C = room temperature For 200 ml and 300 ml, the specified values refer to glass bottles only. Water temperature inside the warming container The following table contains information on water temperatures inside the warming container. Note that these temperatures refer to the water only, not to the food itself. 75-85 °C clean the bottle warmer with water and do not immerse it in water. [. . . ] € Put a mixture of about 150 ml of water and 2 tbs of concentrated vinegar into the container. Put the plug into a suitable wall socket and set the temperature control to position 3. € Let the appliance heat up for about 10 minutes. Remove the plug from the wall outlet and leave the solution standing for another 20 minutes to take effect. [. . . ]