User manual SEVERIN FR 2439

[. . . ] 9 ╞ Deep Fryer Dear Customer, Before using the appliance, please read the following instructions carefully and keep this manual for future reference. The appliance must only be used by persons familiar with these instructions. Connection to the mains supply The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label. [. . . ] Any condensation forming on the inside of the lid will be collected in the tray. It should be emptied after each use, once the appliance has cooled down. Frying container – Inserting the frying container: When placing the frying container into the housing, ensure that the holding bracket for the basket is located opposite from the heating element assembly. €“ Fill amount: Before heating up, the oil/fat level must be between the minimum and maximum level marks. The minimum and maximum level marks can be found on the side of the frying container. Before filling the container with the required quantity of oil, the frying basket should be removed. Note: the difference between the minimum and maximum marks is approx. €“ Types of oil/fat to be used: Only pure vegetable oil/solidified fat should be used in this deep fryer. it can be heated up to 220° C and is neutral in taste. it can be heated up to 220° C and is neutral in taste. The maximum safe capacity of the container is approx. The recess below the heating element acts as a cooling area where residual particles resulting from the frying process, as well as other impurities, are collected. The circulation of the oil/fat results in a lower temperature level around the recess area. This collection process extends the life-span of the frying oil/fat. Removable heating element Before the appliance is connected to the mains, the power cord must be pulled out to its full length from the storage compartment. Fit the heating element securely into its mounting bracket. This will activate an integral safety switch. The appliance can be operated only if the element has been installed correctly; otherwise, the safety switch will not allow the unit to be operated. Do not operate the appliance unless both the heating element and the frying container (filled with oil or fat) have been properly installed. Switching the deep fryer On/Off (Timer) The timer serves to switch on the appliance. By turning the timer clockwise, the intended running-time of the appliance can be set. If the timer is turned anti-clockwise to position ‘ , the appliance is permanently switched on. [. . . ] To prevent the oil/fat from frothing over, the frying basket should be lowered slowly and cautiously into the hot oil/fat. The food should be allowed to float freely without the pieces touching each other. 13 When using battered food, make sure that the batter is firmly attached to the food and all excess flour is removed. Often-used oil/fat is readily recognisable as it is viscous and darker in colour, and gives off an unpleasant smell or tends to foam. [. . . ]