User manual SEVERIN GT 2802

[. . . ] In order to prevent damage to the housing, do not position the appliance on or near hot surfaces or open flames such as hot-plates or gas flames. The appliance must be supervised at any time during operation!There is always a danger that bread may catch fire, e. If it is toasted more than once or comes into contact with the heating elements. [. . . ] Allow the toaster to cool down between the toasting cycles. Please note: the operating lever locks down only when the plug is inserted. - Let the grill compartment heat up for 10 minutes with both heating elements switched on. This is normal and will only last for a very short time. General Information about toasting - Day-old, dry bread darkens faster than fresh bread. - Do not use slices which are too thick or too big. The thickness of the slices for toasting should not exceed 20 mm. — In case of problems or malfunctions and before cleaning, always remove the plug from the wall socket. - To remove a slice caught in the slot, use a blunt wooden stick (e. - Variations in bread type, thickness of the slices and humidity content result in different degrees of browning. Bread should therefore be kept in a sealed wrapping. General information The appliance has the following functions: - Toaster unit with automatic centre alignment for bread slices, electronic browning control and an infinitely adjustable browning control knob. - Grill compartment with upper and lower heating elements, separate control switches for upper and lower heat with integral indicator lamps. suitable for cooking ‘au gratin’ , re-heating and grilling. - The grill compartment and toaster unit can be used at the same time. Wind-up power cord storage Unwind the power cord completely before 9 Toaster operation - Insert the plug into a wall socket. - Use the infinitely adjustable browning control knob to select the desired degree of browning from light ‘1’ to dark ‘5’. - Insert the bread into the toast slot and press the operating lever down. - Once the desired degree of browning is reached, the toaster will switch off automatically and the slices are ejected and can be removed. - To interrupt the toasting process, push the operating lever up. - Allow the toaster to cool down for 60 - 90 seconds after each cycle. — Do not cover the toast slot during operation. [. . . ] - The non-stick coated pan may be cleaned with a mild household detergent. Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. ● Do not use abrasives or harsh cleaning solutions. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. [. . . ]