User manual SEVERIN HM 3812

[. . . ] The blades of the blender attachment are extremely sharp. To prevent injuries, take special care when handling these parts. After switching off, always wait until the motor has come to a complete standstill. Do not allow the appliance or its power cord to touch hot surfaces or to come into contact with any heat sources. [. . . ] Hand mixer operation General information - Depending on the quantity of ingredients, use a sufficiently deep bowl. - Any bowl, round container or glass is suitable, provided it is scratch-proof and the attachments can rotate freely inside. - After fitting the attachments, take the mixer into your hand and position the attachments inside the container filled with the ingredients. - When you have finished mixing or if you wish to interrupt the operation, switch off first before lifting the attachments out of the mixture. Beaters For light and liquid mixtures such as crèmes, mashed potatoes, egg white or cream, insert one or both beaters into the openings on the underside of the mixer and push them gently upwards until they lock into place. Dough hooks For kneading dough, the dough hooks must be used. The hook with the integrated plate must be inserted into the larger opening. Ejecting the attachments The beaters or dough hooks are automatically detached when pressing the eject button. — For heavy dough mixtures, setting 5 must be used. A tall container with a flat bottom is best. Fit the blender attachment into the blender mounting. While pushing it into the mounting, turn the blender clockwise to lock it. Push the blender down into the ingredients in the bowl before switching the unit on. Make sure that the unit can rotate freely inside the bowl and is not blocked during operation. After switching off, always wait until the motor has come to a complete standstill before lifting the blender from the mixture. Always remove the plug from the wall socket after use. The blender attachment can be removed by first turning it anti-clockwise to unlock. - All other attachments can be cleaned using hot water and a mild detergent. [. . . ] The housing may be wiped with a slightly damp, lint-free cloth. The beaters and dough hooks may be cleaned using hot water and a mild detergent. The blade unit of the blender attachment can be unscrewed for cleaning. Before removing it, ensure that the drive pin on the shaft sits correctly in the corresponding recess on the blade unit. [. . . ]