User manual SEVERIN HM 3830

[. . . ] This product complies with all binding CE labelling directives. In order to avoid hazards, and to comply with safety requirements, repairs to this electrical appliance or its power cord must be carried out by our customer service. If repairs are needed, please send the Appliance to our customer service department (see appendix). To avoid the risk of electric shock, do not clean the appliance with liquids or immerse it. [. . . ] Caution: After switching off, always wait until the motor has come to a complete standstill. Do not allow the housing or the power cord to touch hot surfaces such as hotplates, or come into contact with any open heat sources.  When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. Do not touch any moving parts during operation, and do not insert any implements (e. Dough scrapers or cooking spoons) into the bowl unless the motor has come to a complete standstill. No responsibility is accepted if damage results from improper use, or if these instructions are not complied with. Before using for the first time Before the appliance is used for the first time, all attachments and accessory parts must be cleaned as described in the section Cleaning and care. Turbo setting Maximum speed may be obtained for short periods of time by pressing down the turbo button, regardless of the speed level selected. Such as crèmes, mixing dough, mashed potatoes, egg white or cream etc. dough hooks For heavy , kneading-type dough. The hook with the integrated plate must Short-term operation When using the speed levels 1 - 5, the unit should not be operated continuously for more than 4 minutes. Switch off the appliance afterwards and allow the motor to cool down for 20 minutes. Setting 0: The appliance is switched off Settings 1 & 2: For mixing light and Liquid mixtures or when stirring in any ingredients Settings 3, 4 & 5: For stirring and kneading For heavy dough mixtures, setting 5 must be used. Operation Insert the selected attachments into the Openings on the underside of the mixer and push them gently upwards until they lock into place. Depending on the quantity of ingredients, use a sufficiently deep bowl. Any bowl, round container or glass is suitable, provided it is scratch-proof and the attachments can rotate freely inside. Once the attachments are fitted, take the blender in hand and position the attachments inside the container filled with the ingredients. Use the multi-stage switch to turn the appliance on. Once processing is finished, or if you wish to interrupt the operation, switch off first and wait until the motor has come to a complete standstill before lifting the attachments out of the mixture. Ejecting the attachments Always disconnect the appliance from The mains before any attachments are ejected. [. . . ] This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. This guarantee does not affect your statutory rights, nor any legal rights you may have as a consumer under applicable national legislation governing the purchase of goods. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. [. . . ]