User manual SEVERIN HS 0702

[. . . ] Switch off and remove the adapter from the wall socket - after use, - in case of any malfunction during use, - before cleaning the appliance. Caution: the trimming blade is extremely sharp; to prevent injuries, ensure that at all times during use the blade does not touch the skin. please consult a qualified electrician. Children should be supervised to ensure that they do not play with the appliance. [. . . ] - While charging, the transformer within the adapter will become warm. This is perfectly normal and safe and does not indicate a malfunction of any kind. - If the appliance has not been used for a long period, the capacity of the battery may decrease by a certain amount. However, full capacity will be restored after several charge/discharge cycles. 11 Use Changing the trimming heads ■ To remove the trimming head, first turn the head anti-clockwise until the 'open-lock' symbol on the head and the dot mark on the housing are aligned; then pull the head off. – To fit the trimming head, place it on the appliance in such a way that the dot mark and the 'open-lock' symbol on the head are aligned. Then turn the head clockwise to lock it. The dot mark and the 'closed-lock' symbol are now aligned. Fitting the push-on combs The push-on comb attachments allow for cutting length adjustment from 3 to 12 mm. the charging process begins automatically. The comb attachments can only be used with the 30 mm trimming head. When fitting a push-on comb, ensure that it is safely locked by the two locking buttons on the sides. To remove a push-on comb, push it upwards from the side. Operation ■ Before each use, always put a few drops of acid-free oil between the trimming comb and the trimming blade. - Depending on the desired shape or style, either the wide or the small trimming head may be used. - For longer beards, one of the push-on comb attachments can be used together with the wider trimming head. However, you should always start with the larger comb. - The beard is generally cut against the natural direction of growth. - Always begin at the neck and move the appliance upwards through the beard hair. - For a shaped cut, reverse the appliance and shorten the hair from top to bottom without using the push-on comb. Care and Cleaning ■ It is essential to switch off the appliance and then remove the adapter from the wall socket before cleaning and oiling. – To avoid the risk of electric shock, the appliance and the adapter must not be immersed in liquid or even allowed to come into contact with liquid. [. . . ] If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. Hydride (Ni-MH) rechargeable battery pack, which must be removed for disposal. To remove, first disconnect the appliance from the mains. [. . . ]