User manual SEVERIN HS 0704

[. . . ] Do not leave the appliance unattended while in use. Caution: the trimming blade is extremely sharp; to prevent injuries, ensure that at all times during use the blade does not touch the skin. Switch off and remove the adapter from the wall socket - after use, - in case of any malfunction during use, - before cleaning the appliance. The power cord should be regularly examined for any signs of damage. [. . . ] The charging process begins automatically and is shown by the charge indicator on the appliance. The indicator remains lit as long as the charging base is connected to the mains power. The charging process only starts if the unit has been switched off. - Once the charging process is complete, always remove the adaptor from the wall socket first before disconnecting the plug from the appliance. - Whilst charging, the transformer within the adaptor will become warm. This is perfectly normal and safe and does not indicate a malfunction of any kind. The combs have the following sizes: 3 mm, 6 mm, 9 mm and 12 mm. The thinning head is useful for thinning out the hair. Unlock and remove the attachment after use. A few remarks on cutting hair ■ Before each use, always put a few drops of - - - acid-free oil between the trimming comb and the trimming blade. Always start with the largest push-on comb. The hair should first be combed, and then generally cut against its natural direction. For longer hair-cuts use a push-on comb or a normal comb. Cut from bottom to top with the trimming comb lying against the head; lead the appliance upwards through the hair, moving it gradually away from the head at the same time. For a shaped cut, reverse the appliance and shorten the hair from top to bottom without using the push-on comb. please consult a qualified electrician. Cut the areas to be thinned against the natural direction of growth. Cleaning and Care General ■ It is essential to switch off the appliance and remove the adaptor from the wall socket before cleaning and oiling. – For safety reasons, the electric hair trimmer and the adaptor must not be immersed in liquid or even allowed to come into contact with liquid. - If necessary, the housing may be wiped with a smooth dry cloth. 11 Trimming head - After each use, remove the hair from the trimming comb and the blade with the cleaning brush. The trimming head can be removed for cleaning by using the thumbs to push down the two release buttons towards the base. [. . . ] Carefully remove the silvercoloured cover at the front of the appliance, using a suitable screw-driver, then take off the trimming head as described above. Loosen the two screws underneath the trimming head and also the two screws located at the front of the appliance. Take out the internal circuit-board with the battery pack. Now cut the connecting wires leading to the battery pack, one by one, and dispose of the batteries properly. [. . . ]