User manual SEVERIN HS 0771

[. . . ] Do not leave the appliance unattended while switched on. The power cord should be regularly examined for any signs of damage. In the event of such damage being found, the appliance must no longer be used. When removing the adaptor from the wall socket, never pull on the power cord; always grip the adaptor itself. [. . . ] € While charging, the transformer within the adaptor will become warm. This is perfectly normal and safe and does not indicate a malfunction of any kind. € If the appliance has not been used for a long period, the capacity of the battery may decrease by a certain amount. However, full capacity will be restored after several charge/discharge cycles. Use Changing the trimming-heads  To remove a trimming-head, first turn it anti-clockwise until the ‘open-lock’ symbol on the head and the mark on the housing are aligned; then pull the head off. ρ To fit the trimming-head, place it on the appliance in such a way that the mark and the ‘open-lock’ symbol on the head are aligned. Then turn the head clockwise to lock it. The mark and the ‘closed-lock’ symbol are now aligned. Fitting the push-on combs The push-on comb attachments allow for cutting length adjustment from 3 to 12 mm. the charging process begins automatically. These comb attachments can only be used with the wider hair trimming-head. When fitting a push-on comb, ensure that it is safely locked by the two locking buttons on the sides. To remove the comb, push it sideways with the thumb. For the narrow beard/contour trimming-head, use the smallest push-on comb. To fit the push-on comb, slide it over the trimming-head from the top, ensuring that it clicks into place. Using the locking buttons on the sides of the trimming-head, the cutting lengths of the comb can be adjusted to 3, 5 and 7 mm. Operation  Before each use, always put a few drops of acid-free oil between the trimming comb and the blade. cutting hair: – Fit the hair trimming-head. € For longer hair, one of the push-on combs provided may be used. We recommend that you start with the large comb. € The hair should first be combed, and then generally cut against its natural direction. € Always cut from bottom to top with the shaving head lying against the head; lead the appliance upwards through the hair, moving it gradually away from the head at the same time – For a shaped cut, reverse the appliance and shorten the hair from top to bottom without a push-on comb. [. . . ] – Caution: The trimming comb and blade are very sharp. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. [. . . ]