User manual SEVERIN KM 3885

[. . . ] Do not under any circumstances use your hands. Do not touch any moving parts during operation - this can be extremely dangerous. Always switch the appliance off and remove the plug from the wall socket before adding, changing or removing any attachments. After switching off, always wait until the motor has come to a complete standstill. [. . . ] Ensure that the recess on the small safety lid is properly fitted over the corresponding protrusion on the main lid of the bowl before turning it clockwise to lock it. - For safety reasons, use the pestle at all times when feeding the ingredients into the food chute. During operation, the pestle should remain inserted. - Short-term operation When using the kneading function, please note that the appliance is designed for short-term operation only, i. The unit must not be operated for more than 3 minutes at a time. Switch off the appliance afterwards and allow sufficient time for it to cool down before resuming operation. operation settings - Start the kneading process at speed level I. Once the dough has reached a firmer consistency, continue kneading at speed level II. - The dough is ready once it has formed into a ball. - Place the drive shaft extension firmly on the drive shaft in such a way that the extension almost touches the bottom of the bowl. - Hold the insert mounting with the grating surface facing up. - First fit the L-shaped edge of the selected insert (slicer or grater) into the side of its mounting. - Now press the opposite side of the insert into the mounting. (To remove the insert, push it up from below on this side until it comes free from the mounting. ) - When properly inserted, the upper surface of the insert must be flush with the surface of the disc. - Fit the insert mounting with the grating plate inserted onto the shaft extension. - Place the lid on the bowl and turn it clockwise to lock ( ). Afterwards turn the bowl clockwise to lock it ( ). Corresponding protrusion on the main lid of the bowl before turning it clockwise to lock it. - For safety reasons, use the pestle at all times when feeding the ingredients into the food chute. During operation, the pestle should remain inserted. - Always switch the appliance on before feeding the ingredients into the food chute. [. . . ] To reassemble, first place the sealing disc onto the blade shaft from below with its flat side first, then fit the blade into the blender jar and onto the shaft. Finally, engage the coupling by turning it anticlockwise hand-tight. Gebruik Controleknop De controleknop heeft de volgende instellingen: II Het apparaat is aan - hoge power I Het apparaat is aan - lage power 0 Het apparaat is uit. Anslutning till vägguttaget Se till att nätspänningen i vägguttaget motsvarar den som är märkt på apparatens skylt. [. . . ]