User manual SEVERIN KM 3887

[. . . ] This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. the attachments designed for cutting , slicing and grating have extremely sharp blades. To prevent the possibility of severe injury, use extreme care when handling or cleaning these attachments. [. . . ] operation settings - Start the kneading process at speed level 1. Once the dough has reached a firmer consistency, continue kneading at speed level 3. - The dough is ready once it has formed into a ball. Whipping (Emulsifying) - Place the safety lid on the blender mounting and lock it by turning anticlockwise. - Attach the bowl and fit the beater insert to the drive shaft in such a way that it almost touches the bottom of the bowl. - Place the lid on the bowl and turn it anti-clockwise to lock; the arrow-mark on the lid must be aligned with the corresponding dot on the housing. - For safety reasons, use the appropriate Pestle at all times when feeding the ingredients down the food chute. During operation, the pestle should remain inserted. Operation settings - Always start processing at speed level 1 and gradually increase the speed as necessary. - When making mayonnaise, a higher setting is recommended. Slicing and shredding/grating - Place the safety lid on the blender mounting and lock it by turning anticlockwise. - Fit the required insert to the blade mounting. - When properly inserted, the slicing or shredding insert must be flush with the surface of the disc. - Attach the bowl and fit the blade mounting to the drive shaft in such a way that the drive shaft extension almost touches the bottom of the bowl. - Place the lid on the bowl and turn it anti-clockwise to lock; the arrow-mark on the lid must be aligned with the corresponding dot on the housing. - For safety reasons, use the appropriate pestle at all times when feeding the ingredients down the food chute. During operation, the pestle should remain inserted. - Always switch the appliance on before feeding the ingredients down the food chute. When processing larger quantities, the bowl must be emptied from time to time. - Place the juicer lid on the bowl and turn it anti-clockwise to lock; the arrowmark on the lid must be aligned with the corresponding dot on the housing. - For safety reasons, use the appropriate pestle at all times when feeding the ingredients down the food chute. During operation, the pestle should remain inserted. [. . . ] To avoid the risk of electric shock, do not clean the housing with water and do not immerse it in water. The housing may be wiped with a slightly damp, lint-free cloth. Attachment parts should be thoroughly cleaned immediately after use, using hot water and a mild detergent. Do not put the attachments in a dish washer except for the slicing and shredding inserts. [. . . ]