User manual SEVERIN KS 9775

[. . . ] Remplacez l’ampoule par une ampoule de même type, de 15 W et de support E14. Enlevez le support du bas (7) et positionnez à sa place l’autre support du bas (2) ainsi que les rondelles sur l’essieu et le joint en plastique. Fixez le support (7) à la place du support (2). If instructions are not followed, there is a risk of injury, damage to the appliance, and loss of the right to free warranty service. [. . . ] On the other side of the door, attach the stopper intended for doors that open on the left (you will find it in the packet). Remove the middle bracket 4 together with the washers on the axle and the plastic spacer. Remove the bottom bracket 2 together with the washers on the axle and the plastic spacer. Unscrew the axle with the washers and screw it into the aperture provided on the other side. Remove the bottom bracket 7 and in its place attach the other bottom bracket 2 together with the washers on the axle and the plastic spacer. Fix this bracket 7 in place of the other bracket 2. Remove the covers 8 from the partition separating the refrigeration compartment from the freezer compartment and place them in the apertures on the other side. Remove the covers 9 from the doors of the refrigeration compartment and the freezer compartment and place them in the apertures on the other side. Hang the freezer compartment door on the axle of bracket 2. Turn bracket 4 around 180° together with the washers on the axle and the plastic spacer, transferring the washers to the axle on the other side of the bracket. Once the bracket is attached to the freezer compartment door, fix it in place on the other side of the refrigerator. Hang the refrigeration compartment door on the axle of bracket 4. Turn the bracket 6 around 180° together with the washers on the axle and the plastic spacer. Remove the axle and the washers and reattach them on the other side of the bracket. Once the bracket 6 is attached to the refrigeration compartment door, fix it in place on the other side of the refrigerator in the uppermost apertures. Use the covers c to cover the bracket and the remaining space. Remove the bolt covers a and the stoppers b. Remove the screws that hold the handles in place. Move the handles to the other side and screw them in place. Place the stoppers into the remaining apertures in the door, and put the screw caps in place. Place cover 10 on bracket 7, and while holding it in place, attach the bottom cover 1. Temperature regulation The temperature in the refrigerator compartment is controlled using the thermostat knob 2 (fig. [. . . ] Clean the thaw water channel space with a cleaner intended for that purpose. Food items or dishes in the refrigeration compartment are touching the back wall of the compartment. Do not let food items or dishes touch the back wall. The thaw water collection tray has slipped off the compressor. [. . . ]