User manual SEVERIN KV 8011

[. . . ] Making individual settings for coffee preparation. 1 Greeting Dear Customers, we are pleased that you have selected a SEVERIN fully automatic coffee maker. Dive into the enjoyable world of coffee and milk specialties. Before you start, please take some time to get to know your machine with the help of the operating instructions. [. . . ] In order to operate your device optimally, set the water hardness according to the specifications of your water utility and the water test strip. This is how to select the water hardness: 1. Press the menu button for at least 3 seconds and use the e-Select to select the DEVICE MENU. Select with the e-Select • YES, if you want to insert a water filter in the water tank or • NO, if you do not want to use a water filter. 4 Energy savings options The device can switch itself off if it is not used for a longer period of time. Here‘s how to set the energy savings options: 1. Press the menu button for at least 3 seconds and use the e-Select to select the DEVICE MENU. Then select the AUTO POWER-OFF • the button under the display field settings. ÂÂ if you want to keep your personal For a short while, the display shows the note: DEVICE SET TO FACTORY DEFAULTS. You must now perform all the basic settings again (►„5. ÂÂ The display shows the currently-set time for the automatic switch-off. Turn the e-Select to change the setting and • confirm your entry by pressing the e-Select or • cancel the change with the button under the display field . Resetting the device in case of incorrect language setting If you have accidentally set an incorrect language and a resetting via the menu is not possible, you can also reset the device to the delivery state as follows: 1. Press the outer two buttons below the display and hold them down. Switch the device on and continue to hold the buttons down until the message DEVICE SET TO FACTORY DEFAULTS. You must now perform all the basic settings again (►„5. 5 Resetting the device You can reset the device to the factory settings. All personal settings for coffee preparation are thus lost and the device starts once again with the commissioning (►„5. switching on for the first time“). Resetting the device via the menu Here‘s how to reset the device to the factory settings: 1. Press the menu button for at least 3 seconds and use the e-Select to select the DEVICE MENU. Press • the button under the display field settings or if you want to call up the factory Version 2  2011-12-01 17 8. [. . . ] 1 Adjusting the grinding fineness“) and clean the brewing unit (►„8. When you have added ground coffee via the powder dosing chamber, increase the amount of coffee powder which you are putting in for a cup portion. There is too little coffee in the brewing unit. 1 Display device information This is how to display device information: For questions to customer service in case of a fault, you can display various device information on the display. [. . . ]