User manual SEVERIN PG 1501

[. . . ] Should the appliance, for instance, have been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance. During operation, the barbecue grill must be placed on a level, heat-resistant surface, impervious to splashes and stains. When grilling food with a high fat 9 or moisture content, splashes are not always avoidable. Do not fit the wind screen if the appliance is used indoors. [. . . ] The appliance is not intended to be operated by means of an external timer or separate remote-control system. Before carrying, transporting or storing the grill, ensure that is has sufficiently cooled down. Ensure that the grill is not stored outdoors, or in any other location where it might be subjected to extremes of temperature or high humidity. No responsibility can be/will be accepted if damage results from improper use, or if these instructions are not complied with. This barbecue grill is intended for domestic use only and not for commercial applications. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel. If repairs are needed, please send the appliance to one of our customer service departments. 10 The address can be found in the appendix to this manual. Grill with additional base stand: Assemble the base stand according to the schematic diagram supplied, and then place the grill onto the stand. The small feet under the grill connect with the tops of the vertical legs of the base stand. Ensure that the grill and base stand are placed in a safe and stable position. The power cord should be routed in such a way that no one is likely to trip over it. Heating element The junction box contains a safety switch. Place the grill pan into the plastic housing first, and then fit the heating element inside the grill pan and housing. The safety switch is activated automatically when the heating element has been properly fitted. If not fitted correctly, the appliance can not be switched on. Before using for the first time - Remove any packaging materials from the appliance. - Clean the grill rack and grill pan with warm soapy water. Place the grill pan inside the plastic housing. Place the heating element into the grill pan. If required, additional accessories may be fitted according to the diagram shown in the instructions. - Fill the grill pan with water up to the `Max' marking. - Let the grill heat up for approximately 5 minutes without any food on the rack. [. . . ] This is normal and does not impair the safe function of the grill. Storage After cleaning, the grill should be stored indoors in a dry location. Disposal Do not dispose of old or defective appliances in domestic garbage, but only through public collection points. Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. [. . . ]