User manual SEVERIN PG 8525

[. . . ] Should the appliance, for instance, have been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance. — During operation, the barbecue grill must be placed on a level, heat-resistant surface, impervious to splashes and stains. When grilling food with a high fat 9 or moisture content, splashes are not always avoidable. — Do not fit the wind screen if the appliance is used indoors. [. . . ] 10 ● In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual. Grill with additional base stand: Assemble the base stand according to the schematic diagram supplied, and then place the grill onto the stand. The small feet under the grill connect with the tops of the vertical legs of the base stand. Ensure that the grill and base stand are placed in a safe and stable position. The power cord should be routed in such a way that no one is likely to trip over it. Heating element The junction box contains a safety switch. Place the heating element into the grill pan. The safety switch is activated automatically when the heating element has been properly fitted. If not fitted correctly, the appliance can not be switched on. Before using for the first time - Remove any packaging materials from the appliance. - Clean the grill plate and grill pan with warm soapy water. Place the heating element into the grill pan. If required, additional accessories may be fitted according to the diagram shown in the instructions. - Fill the grill pan with water up to the ‘Max’ marking. - Let the grill heat up for approximately 10 minutes without any food on the rack. This will lessen the smell typically encountered when first switching on a new grill (a slight smell and a little smoke may be emitted - ensure sufficient ventilation). Grilling - The grill pan must be filled with water up to the ‘Max’ marking. - Fit the heating element; then ensure that the grill plate is placed correctly onto the element. - Insert the plug into a suitable earthed power-outlet. - Turn the thermostat control knob clockwise all the way. [. . . ] If within the guarantee period, please also provide the guarantee card and proof of purchase. Hvis apparatet for eksempel har været tabt på en hård overflade må det ikke længere anvendes: Selv skader der ikke er synlige kan have ugunstig indvirkning på sikkerheden ved brug af apparatet. For at undgå risikoen for elektrisk stød må varmeelementet og ledningen aldrig nedsænkes i nogen form for væske og heller komme i kontakt med den. Sørg også for kun at benytte en forlængerledning der er godkendt for udendørs brug. [. . . ]